Products

Day joint bands

The pauses during concreting are termed day joints, technical joints, temporary joints. Often due to technical and organisational conditions, the contractor is forced to conduct concreting works in a limited scope. The division of such works into phases is influenced by numerous factors, such as the speed of concrete mix binding, geometric shape of the executed site, limited formwork surface available to the contractor, machine effectiveness, ambient conditions, etc.
In general, one can say that day joints are joints that diminish with time, with the structure becoming a unified, monolithic system. These are, usually, weaker spots of components, and hence, it is recommended to place day joints in spots where external forces cancel each other out, or to design them ensuring appropriate cross-section load bearing capacity. A broad range of norms describes the rules of designing structures, where concreting works are spread out over a longer period of time.
Polish Standard PN-EN 1992 explains the term: 'A complex component is a component made of concrete poured at the construction site and pre-cast concrete, joined by reinforcement bars or joined without reinforcement.' This term closely relates to any divisions or pauses during concreting, where the pouring of concrete is delayed in time, but where it is not always related to the supply of ready components.
It is in turn necessary to lay out cross reinforcement through two components divided by a concreting interruption. At the same time, the German norm DIN 1045-1 describes such rebar as 'stitching reinforcement'.
Standard ACI 318-08 of the American Concrete institute classifies joints as being either smooth surfaces or rough surfaces with purposefully created grooves. The shape of the executed day joint influences greatly the relevant component's load bearing capacity as well as the tightness of such a joint. Executing a notched joint (bolt) for the purpose of more precise joining of structural components, can be done through the use of profiled day joint meshes (i. e. STC mesh).
Beside day joints and technical joints, contraction joints are also important. These constitute targeted actions weakening the cross-section locally, aimed at creating cracks (fractures), contributing to the reduction of tensions exhibited by contractions.
Due to the need to ensure component tightness, one can differentiate between day joints that:

  • do not require tightness,
  • require tightness against the influence of ground water and other water acting on them, without pressure (i. e. external walls and foundation slabs, underground parking lots, ceiling roofs, etc.),
  • must guarantee joint tightness for water under pressure (i. e. tanks, foundation containers, etc.).

 

Day joint sealing bands

 

Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
A100
100
40
3,0
10
25/40
roll 0,60
SU-TU-BP-0-02042
A120
120
45
3,0
10
25/40
roll 0,65 SU-TU-BP-0-02043
A150
150
45
3,0
10
25/40
roll 0,80
SU-TU-BP-0-02044
A200
200
70
3,0
15
25/20
roll 1,10
SU-TU-BP-0-02047
A240
240
80
3,5
15
25/20
roll 1,40
SU-TU-BP-0-02048
A320
320
110
4,5
15
25/16
roll 2,00
SU-TU-BP-0-02054
A500
500
150
6,0
20
25/2
roll 4,10
SU-TU-BP-0-02060

Properties:

Besaflex type A sealing bands are characterised by high resistance to water ageing. The upper limit working temperature without load is approx. 80 °C, above this temperature, the band's mechanical strength changes. Joining Besaflex bands is done by welding at temperatures of 120 °C-165 °C.1)2)

 

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
A190
190
70
3,5
15
25/20
roll 1,10
SU-TU-BP-0-02045
A240
240
80
4,0 15
25/20
roll 1,40 SU-TU-BP-0-02049
A320
320
110 5,0 15
25/16
roll 2,00
SU-TU-BP-0-02055
A500
500
120
6,5
20
25/2
roll 4,10 SU-TU-BP-0-02062

Properties:

Nitriflex type A sealing bands are characterised by better chemical resistance and mechanical strength than Besaflex bands. They can be used for sealing of structures under threat of water at greater pressure values. Joining of Nitriflex sealing bands by welding allows for permanent and cost-effective execution of all kinds of joints of PVC bands.1)2)

 

Polyflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
A200
190
70
3,05
15
25/20
roll 1,20
SU-TU-BP-0-02136
A240
240
90
3,5
15
25/20
roll 1,50
SU-TU-BP-0-02137
A320
320
110
4,5
15
25/16
roll
2,10
SU-TU-BP-0-02138
A500
500
120
6,0
20
25/2
roll
4,30
SU-TU-BP-0-06301

Properties:

Polyflex sealing bands are characterised by good chemical resistance. They are particularly recommended for structures susceptible to low temperatures. Polyflex bands are joined by welding.

 

 

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.

F 100
100
75
7,0
32
25/6 roll
2,20
SU-TU-BP-0-02232
F 120
120
80
8,0
32
25/5
roll 3,10 SU-TU-BP-0-02233
F 150
150
100
8,0
32
25/5
roll 3,50
SU-TU-BP-0-02235
F 250
250
150
6,0
32
25/5
roll
2,70
SU-TU-BP-0-02052
F 300
300
100
6,0
32
25/5
roll 3,10
SU-TU-BP-0-02236
F 350
350
120
6,0
32
25/5
roll 3,50
SU-TU-BP-0-02237

Properties:

High thermal resistance of type F Elastoflex bands are one of the most important criteria of their selection for insulating structures at locations, where they are in contact with hot bitumen compounds. Apart from that, they exhibit high tear resistance and relative elongation at break, which corresponds to being able to withstand liquid under pressure of approx. 25 m of water column.

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
ASI 200 D
200
70
3,5
15 25/20
roll 1,70
SU-TU-BP-0-02149
ASI 240 D 240
80
4,0
15
25/20
roll 2,00
SU-TU-BP-0-02151
ASI 320 D
320 100 5,0 15
25/16
roll 2,80
SU-TU-BP-0-02043

Properties:

Type ASI-D Nitriflex sealing bands have an internal steel reinforcement bar embedded in their cross-section. ø8 bars are distributed every 150 mm, providing better stability during installation at the joint between the foundation slab (foot) and foundation wall.1)2)

 

Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
AS 100
100
50
3,0
10
25/40
roll 1,00 SU-TU-BP-0-02139
AS 120
120
60
3,0
10
25/40
roll 1,15
SU-TU-BP-0-02140
AS 150
150
60
3,0
10
25/40
roll 1,30
SU-TU-BP-0-02141
AS 200
200
70
3,5
15
25/20
roll 1,60
SU-TU-BP-0-02142
AS 240
240
80
3,5
15
25/20
roll
1,90
SU-TU-BP-0-02144
AS 320
320
100
4,5 15
25/16
roll 2,60
SU-TU-BP-0-02146

Properties:

Besaflex type AS bands are characterised by equal properties to Besaflex type A bands. They are additionally bound by ø8 steel clamps every 150 mm. This provides better stability during installation at the joint between the foundation slab (foot) and foundation wall.1)2)

 

 

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
AS 240 D
240
80 4,0
15
25/20
roll
1,90
SU-TU-BP-0-02145
AS 320 D
320
100
5,0
15 25/16
roll
2,60
SU-TU-BP-0-02147

Properties:

Nitriflex type AS-D sealing bands have the same mechanical parameters as Nitriflex bands. They are additionally equipped with ø8 steel bar clamps distributed every 150 mm. They provide better stability at installation at the joint between the foundation slab (foot) and foundation wall.1)2)

 

 

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
A260 DBS
260
120
9,0
26
25/4
roll 3,80
SU-TU-BP-0-02053
A320 DBS
320
165
10,0
26 25/4
roll 4,30
SU-TU-BP-0-02057
A400 DBS 400
190
11,0
30
25/3
roll 5,00
SU-TU-BP-0-02059

Properties:

Nitriflex type A-DBS sealing bands have the same advantages of Nitriflex bands as the type A bands. However, the flexible part of these bands is thicker by approx. 6 mm as compared to their type A counterparts. Thanks to them being thicker, they are able to protect against water pressure higher by a factor of 1,5 than the pressure from the diagram on page 20.


Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
ASI 200
200
70
3,5
15
25/20
roll
1,70
SU-TU-BP-0-02148
ASI 240
240
80
3,5
15
25/20
roll 2,00
SU-TU-BP-0-02150
ASI 320
320
100
4,0 15
25/16
roll 2,80 SU-TU-BP-0-02152

 

Properties:

Besaflex type ASI sealing bands are charcterised by high resistance to ageing in water and conform to all standard solutions. Besaflex type ASI bands have an internal steel reinforcement bar embedded in their cross-section. ø8 bars are distributed every 150 mm, providing better stability during installation at the joint between the foundation slab (foot) and foundation wall.1)2)

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FS 310
310
80
10
22
25/4
roll
4,20
SU-TU-BP-0-06333

Properties:

Elastoflex type FS bands have all the advantages of Elastoflex bands, thanks to which they may be successfully used for providing tightness to tunnels and bridge structures. Their additional advantage is sheet steel embedded at arm ends, extending the water penetration route, and providing greater rigidity during installation.

 

 

Day joint sealing bands

Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AA200
200
80
3,5
20
4
25/5
roll 1,50
SU-TU-BP-0-02067
AA250
240
90
4,0
25
4
25/4
roll 2,00 SU-TU-BP-0-02079
AA250/35
240
90
4,5
35
4
25/4
roll
3,50
SU-TU-BP-0-02080
AA320
320
110
4,0
25
6
25/4
roll 2,70
SU-TU-BP-0-02082
AA320/35
320
110
4,5
35
6
25/4
roll 4,50
SU-TU-BP-0-02095
AA320/45
320
110
4,5
45
6
25/4
roll 4,90
SU-TU-BP-0-02097
AA500
500
120 4,0
25
8
25/2
roll 6,30
SU-TU-BP-0-02102
AA500/35
500
120
4,5
35
8
25/2
roll 6,70
SU-TU-BP-0-02106
AA625/35
625
300
5,5
35
10
25/1
roll
8,30
SU-TU-BP-0-0210
AA800
800
300
5,5
25
12
25/1
roll 8,30 SU-TU-BP-0-02110

Properties:

Besaflex type AA external sealing bands are the basic form of protection of day joints during concreting of foundation slabs and walls in buildings designed to be resistant to environmental influences classified as exposure classes X0, XC2, XC4, XS1, XS2, XS3, XF1, XF2, XF3, XF4, XA1, with structure type of S4 (per standard PN-EN 1992). Besaflex bands may be easily joined by welding.1)2)

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AA240/25
240
80
3,5
20
4
25/4
roll
3,20
SU-TU-BP-0-02198
AA240/35
240
90
4,0
25
4
25/4
roll
3,50
SU-TU-BP-0-02077
AA240/45
240
90
4,5
35
4
25/4
roll
3,90
SU-TU-BP-0-02078
AA320/25
320
90
4,5
45
4
25/4
roll 4,10
SU-TU-BP-0-02093
AA320/35
320
110
4,0
25
6
25/4
roll 4,50
SU-TU-BP-0-02096
AA320/45
320
110
4,5
35
6 25/4
roll
4,90
SU-TU-BP-0-02098
AA500/25
500
120
4,0
25
8
25/2
roll 5,40 SU-TU-BP-0-06381
AA500/35
500
120
4,5 35
8
25/2
roll 6,70 SU-TU-BP-0-02107

Properties:

Nitriflex type AA external sealing bands effectively protect day joints executed in foundation slabs and walls in structures classified as suitable for Besaflex bands against water influence. In addition, they may be used in structures under threat of chemically aggressive agents described as exposure classes XA2 and XA3, described in detail in standard EN 206-1. They are recommended for sealing day joints in concreted infrastructural objects, i. e. sewage treatment plants, petrol stations, and all kinds of manufacturing halls where process technical liquids are used.1)2)

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
A250
250
100
6,0
31
25/5
roll 3,50
SU-TU-BP-0-02051
A350
350
100
6,0
31
25/4
roll 4,80
SU-TU-BP-0-02058
A500
500
150
6,0
31
25/1
roll 6,60
SU-TU-BP-0-06385
A250-2
250 100
5,5
30
25/5
roll
3,10 SU-TU-BP-0-08198

Properties:

Elastoflex type A external sealing bands are used for sealing day joints executed during concreting of foundation slabs and walls in road structures, tunnels, as well as foundation slabs and boxes for the purpose of servicing heavy industrial equipment. They are recommended everywhere where high shifts and dynamic forces burdening the structure are foreseen. Form profiles as well as al joining of Elastoflex bands should be executed by curing in an appropriate enclosure.

 

Polyflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AAP240
240
90
4,0
25
4
25/6
roll 2,10
SU-TU-BP-0-06386
AAP320
320
110
4,0
25
6
25/6
roll
3,20
SU-TU-BP-0-08212

Properties:

Polyflex type AAP external sealing bands are used for protection of day joint against water, in structures additionally protected by surface insulation made of PE film. They can be used in structures under threat of intense chemical aggression and low ambient temperature. Polyflex tapes are joined by welding at approx. 200 °C.

 

 

Corner day joint sealing bands

Nitriflex
Symbol
a1
[mm]
a2
[mm]
b1
[mm]
b2
[mm]
Anchors
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
AA240 EA
120
120
45
45
4
25/6
roll 2,00
SU-TU-BP-0-02070
AA240 EW
120
120
45
45
4
25/6
roll
2,00
SU-TU-BP-0-02072
AA320 EA
170
170
55
55
6
25/6
roll 2,00
SU-TU-BP-0-02084
AA320 EW
170
170
55
55
6
25/6
roll 2,80
SU-TU-BP-0-02090
AA320 EI
170
170
100
100 4
25/6
roll 2,80
SU-TU-BP-0-02087
AA500 EA
250
250
85
85
8
25/4
roll 3,70
SU-TU-BP-0-02099
AA500 EW
250
250
85
85
8
25/4
roll 3,70
SU-TU-BP-0-02101
AA500 EI
250
250 85
85
8
25/4
roll 3,70
SU-TU-BP-0-02100
Besaflex BS
Symbol
a1
[mm]
a2
[mm]
b1
[mm]
b2
[mm]
Anchors
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
AA240 EA
120
120
45
45
4
25/6
roll
2,10
SU-TU-BP-0-06410
AA240 EW
120
120
45
45
4
25/6
roll 2,10
SU-TU-BP-0-06411

Properties:The Nitriflex type AA external corner day joint sealing bands and the Besaflex BS type EC bands were designed to effectively protect structures at spots, where day joints were created at wall corners. Type EA, EI, and EW bands may be used in reinforced concrete components of varying thickness values.

Expansion joint sealing bands

Expansion joints are purposefully created divisions in building structures, designed to limit or remove tensions caused by temperature differences, concrete contraction, unequal setting and the effects of mining. In certain cases, expansion joints are made because the works are divided into phases and because of installation simplicity.
When designing the edge of an expansion joint, one has to take care of its shape and the form of reinforcement around it, so that they allow proper work of the expansion joint components in the relevant directions. One cannot lay out reinforcement bars through the expansion slit, and the edge of the slab should be reinforced along its length. Depending on their type, one can divide such joints into the following:

  • structural (full) expansion joints - they separate a part of the building making up one complete whole in terms of statics, technology and foreseen structure use, or stem from its great size. It is recommended to separate by expansion joints parts of structures with different heights, and differing materially in terms of structural solutions, both with respect to statics as well as to materials. Expansion joints are usually made when a newly-designed structure is erected directly beside an existing one.
  • thermal expansion joints - constructed so as to eliminate deformations of individual fragments of structures caused by varying thermal reactions and rheological properties of concrete. In order to ensure the freedom of deformation, the expansion slit should be provided with an appropriate width, allowing the structure to work as required, or otherwise execute components providing rigidity. When shaping the rebar arrangement to suit the thermal influences, one assumes that its components located in the soil are not susceptible to these effects.
  • anti-vibration joints - in most cases associated with industrial construction, where they are supposed to protect a site or its individual constituent components against the influence of vibrations of foundations (dynamic and/or acoustic influences) and frame structures, on which machinery is located. Similar characteristics and the obligation of usage of building expansion joints are enforced through a structure's location within an area of action of seismic waves caused by earthquakes or mining damage.

The Polish national attachment to standard PN-EN 1992-1-1 indicates maximum distances between expansion joints:

Table no. NA.1
Structure type Distance between expansion joints djont
in metres
Structures subject to outside temperature variations
a) non-reinforced walls
b) reinforced walls
c) reinforced concrete framework structures
d) uninsulated roofs, cornices

5
20
30
20
Heated, multi-storey buildings
a) internal walls and ceilings, concreted monolithically in one line
as above - concreted in sections not exceeding 15 m in length,
with spaces left over for later concreting
c) internal pre-cast walls with external pre-cast walls
d) as above - with external walls of aerated concrete
e) as above - with light outside walls, lengthwise part providing rigidity in the central part of the building
f) as above - with fixing walls in the end parts of the building
g) pre-cast framework structures and monolithic structures with reinforcement in the central part of the building
h) monolithic framework structures with walls providing rigidity in the end parts - as appropriate

30
as in the case of internal pre-cast walls
50
40
70
50
as in the case of internal pre-cast walls
as for a) or b))
Heated single-storey reinforced concrete walls without walls providing rigidity or only in central part, with outside walls of low rigidity not experiencing cracking in case of deformations in their plane - depending on structure height h
a)  h≤5m
b)  5 c)  h  ≥  8  m


60
10 + 10h
90
Massive walls, if no special processes are used to reduce hardening heat and contractions depending on thickness
a) b = 0,3 m ÷ 0,6 m
b) 0,6 m < b ≤ 1,0 m
c) 1,0 m < b ≤ 1,5 m
d) 1,5m < b ≤ 2,0m

Distances between expansion jointst indicated in table NA.1 do not apply to structures located in areas of mining activity, and do not apply to cases, when expansion joints are necessary for other reasons than effects of concrete contraction and temperature differences.

Internal day joint sealing bands

 

Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
D 120
120
70 3,0
10
10
25/10
roll 1,05
SU-TU-BP-0-02164
D 150
150
70
3,0
10
10
25/10 roll 1,15
SU-TU-BP-0-02165
D 200
200
90 3,5
10
10
25/8
roll 1,30
SU-TU-BP-0-02167
D 240
240
90
4,0 15
20
25/5
roll 1,65 SU-TU-BP-0-02168
D 320
320
110 5,0
15
20
25/4
roll 2,60 SU-TU-BP-0-02174
D 350
350
120
5,0 15
20
25/4
roll 4,40 SU-TU-BP-0-02181
D 500
500
150
6,0
20
20
25/2
roll
3,00
SU-TU-BP-0-02185

Properties:

Besaflex type D sealing bands have all the characteristics appropriate for the material of which they are made. The selection of sealing bands for expansion joints is dependent upon the expected values presented in selection diagrams from page 20.1)2)

 

                                

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
D 260 DBS
260
120
9,0
28
20
25/4
roll 3,90
SU-TU-BP-0-02173
D 350 DBS
350
170
11,0
30
20
25/4
roll 4,90
SU-TU-BP-0-02183
D 400 DBS
400
190
11,0
32
20
25/2
roll
6,10 SU-TU-BP-0-02184

Properties:

Nitriflex type D-DBS sealing bands possess all the advantages of Nitriflex type D bands. However, the flexible part of these bands is thicker by approx. 5 mm from the basic version. Thanks to this part being thicker, they are able to protect expansion joints against water pressure higher by a factor of 1,5 than the pressure from the diagram on page 20.1)2)

 

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
D 190 190
75
4,0
15
10 25/8 roll 1,40
SU-TU-BP-0-02166
D 240
240
95
4,5
15
20
25/5
roll 1,70 SU-TU-BP-0-02169
D 240/6
240
95
6,0
25
20
25/4
roll
3,00 SU-TU-BP-0-02171
D 240/9
240
95
9,0
25
20
25/4
roll 3,60
SU-TU-BP-0-02172
D 320
320
110
5,5
15
20
25/3
roll 2,70
SU-TU-BP-0-02175
D 320/6
320
110
6,0
25
20
25/3
roll
3,50
SU-TU-BP-0-02177
D 320/9
320
110
9,0
25
20
25/3
roll
4,10
SU-TU-BP-0-02178
D 350
350 120
6,0
15
20
25/3
roll 3,30
SU-TU-BP-0-02182
D 500
500
155
6,5
10
20
25/2
roll 4,60
SU-TU-BP-0-02186

Properties:

Nitriflex type D sealing bands have all the characteristics appropriate for the material of which they are made. The selection of sealing bands for expansion joints is dependent upon the expected values presented in selection diagrams from page 20. Thanks to the higher chemical resistance of the material, of which they are made, they can be installed in objects designed for exposure classes XA2 and XA3 according to standard EN 206-1 and for all standard solutions.1)2)

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
FM 200 200
110
7,0
32
20
25/5
roll 3,50 SU-TU-BP-0-02238
FM 250
250
125
8,0
32
20
25/5
roll
4,10
SU-TU-BP-0-02239
FM 300
300
175
8,0
32
20
25/5
roll 4,90 SU-TU-BP-0-02241
FM 350
350
180
12,0
38
20
25/5
roll
6,20
SU-TU-BP-0-02243
FM 400 400
210
12,0
38
20
25/4
roll
6,90 SU-TU-BP-0-02245
FM 500
500
300
13,0
38
20
25/2
roll
10,00 SU-TU-BP-0-02246
FM 250 - 2
250
125
6,0
26 20
25/5
roll
3,40 SU-TU-BP-0-02240
FM 300 - 2
300
175
6,0
28
20
25/5
roll 3,90
SU-TU-BP-0-02242
FM 350 - 2 350
350
6,0
30
20
25/5
roll
4,70
SU-TU-BP-0-06356

Properties:

Elastoflex type FM bands may be used in structures susceptible to high movements of the separated components. They are an excellent solution for protection of expansion joints in road structures and press-equipped manufacturing halls, susceptible to high dynamic loads.

 

 

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
FMS 350
350
120
10,0
32
20
25/4
roll 5,20
SU-TU-BP-0-02247
FMS 400
400
170
11,0 32
20
25/4
roll 5,20
SU-TU-BP-0-02248
FMS 500
500
230
13,0 32
20
25/2
roll 8,00
SU-TU-BP-0-02249

Properties:

Elastoflex type FMS bands should be used as Elastoflex type FM bands. The sheet steel embedded into the arm ends increase the water penetration route, and also provide increased rigidity during installation.

 

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
FMS 400 DS
400
170
11,0
35
20
25/4
roll
6,20
SU-TU-BP-0-08199
FMS 500 DS
500
230
13,0
35
20
25/2
roll
8,20 SU-TU-BP-0-06369

Properties:

Elastoflex type FMS-DS sealing bands are foreseen for coverage of expansion slits in structures, where high positive and negative movements of expansion joints were designed. The executed expansion chamber allows greater band deformation close to the joint. In addition, at the ends of the arms of these bands, steel sealing bands are embedded. They possess all qualities applicable to Elastoflex type FMS bands.

 

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
k
[mm]

Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
FM 350 DS
500
230
13,0
35
20
25/3
roll
4,70
SU-TU-BP-0-02244

Properties:

Elastoflex type FM-DS sealing bands are foreseen for coverage of expansion slits in structures, where high positive and negative movements of expansion joints were designed. The executed expansion chamber allows greater band deformation close to the joint. They possess all qualities applicable to Elastoflex type FM bands.

 

Besaflex BS
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]
Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
CC 150 150
116
5,0
20
25/5
roll 2,10
SU-TU-BP-0-06302
CC 200
200
87
5,0
20
25/5
roll 3,00
SU-TU-BP-0-06303
CC 250
250
116
6,0
24
25/5
roll 3,90
SU-TU-BP-0-06304
CC 300
300
166
7,0 24
25/4
roll
4,80 SU-TU-BP-0-06305

Properties:

Besaflex BS type CC sealing bands, according to British standards, are characterised by better mechanical properties than their base material. However, in addition, they maintain all their advantages. Besaflex sealing bands are joined by welding. There are, in addition, no counterindications against joining Besaflex and Besaflex BS bands.

 

 

External day joint sealing bands

Besaflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AD 200 200
80
3,5
20 4
25/5
roll
1,70 SU-TU-BP-0-02111
AD 250
240
90
4,0
25
4
25/4
roll
2,20 SU-TU-BP-0-02116
AD 250/35
240
90
4,5
35
4
25/4
roll 3,70 SU-TU-BP-0-02118
AD 250/45
240
90
4,5 45
4
25/4
roll 4,10 SU-TU-BP-0-02119
AD 320
320
110
4,0 25
6
25/4 roll 2,90 SU-TU-BP-0-02120
AD 320/35
320
110
4,5
35
6
25/4
roll
4,70 SU-TU-BP-0-02122
AD 320/45
320
110
4,5
45
6
25/4
roll
5,10 SU-TU-BP-0-02124
AD 500
500
120
4,0
25
8
25/2
roll 5,60 SU-TU-BP-0-02125
AD 500/35
500
120
4,5
35
8
25/2
roll 6,90 SU-TU-BP-0-02127

Properties:

Besaflex type AD external expansion joint sealing bands should be used to protect against water of expansion joints in buildings designed to be resistant to environmental influences classified as exposure classes X0, XC2, XC4, XS1, XS2, XS3, XF1, XF2, XF3, XF4, XA1, with structure type of S4 (per standard PN-EN 1992). Besaflex bands may be easily joined by welding.1)2)

 

Nitriflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA240/25
240
90
4,5
25
4
25/4
roll 2,20
SU-TU-BP-0-02198
DA240/35
240
90
5,0 35
4
25/4
roll
3,70 SU-TU-BP-0-02200
DA240/45
240
90
5,0
45
4
25/4
roll
4,10
SU-TU-BP-0-02202
DA320/25
320
110
4,5
25
6
25/4
roll
2,50
SU-TU-BP-0-02211
DA320/35
320
110
5,0
35
6
25/4 roll
4,70
SU-TU-BP-0-02213
DA320/45
320
110
5,0
45
6
25/4
roll
5,10
SU-TU-BP-0-02215
DA500/25
500
120 4,5
25
8
25/2
roll
5,60 SU-TU-BP-0-06416
DA500/35
500
120
5,0
35
8
25/2
roll 6,90
SU-TU-BP-0-02224

Properties:

Nitriflex type AA external sealing bands effectively protect expansion joints executed in foundation slabs and walls in structures classified as suitable for Besaflex bands against water influence. In addition, they may be used in structures under threat of chemically aggressive agents described as exposure classes XA2 and XA3, described in detail in standard EN 206-1. They are recommended for sealing expansion joints in concreted infrastructural objects, i. e. sewage treatment plants, petrol stations, and all kinds of manufacturing halls where process technical liquids are used.1)2)

Elastoflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AM 250
250
100
6,0
31
4
25/5
roll 3,70 SU-TU-BP-0-02131
AM 350
350
100
6,0
31
6
25/4
roll 4,90 SU-TU-BP-0-02133
AM 500
500
150
6,0
31
8
25/1
roll 6,90
SU-TU-BP-0-02134
AM 250-2
250 100
5,5
30
4
25/5 roll
3,30
SU-TU-BP-0-02132

Properties:

Elastoflex type AM external sealing bands are used for sealing expansion joints executed during concreting of foundation slabs and walls in road structures, tunnels, as well as foundation slabs and boxes for the purpose of servicing heavy industrial equipment. They are recommended everywhere where high shifts and dynamic forces burdening the structure are foreseen. Form profiles as well as al joining of Elastoflex bands should be executed by curing in an appropriate enclosure.

Polyflex
Symbol
a
[mm]
b
[mm]
c
[mm]
f
[mm]

Anchors

Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
ADP240
240
90
4,0
25
4
25/6
roll 2,30 SU-TU-BP-0-02129
ADP320
320
110
4,0
25
6
25/5
roll
3,50 SU-TU-BP-0-02130

Properties:

Polyflex type ADP external sealing bands are foreseen for protection against water intrusion of expansion slits in structures additionally protected by surface insulation of PE film. They can be used in structures under threat of intense chemical aggression and low ambient temperature. Polyflex tapes are joined by welding at approx. 200 °C.

 Corner day joint sealing bands

Nitriflex
Symbol
a1
[mm]
a2
[mm]
b1
[mm]
b2
[mm]
Anchors
Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA240 EA
120
120
45 45
4
25/6
roll 2,20
SU-TU-BP-0-02189
DA240 EW
120
120
45
45
4
25/6
roll 2,20 SU-TU-BP-0-02193
DA320 EA
170
170
55
55
6
25/6
roll 3,00 SU-TU-BP-0-02203
DA320 EW
170
170
55
55
6
25/6
roll
3,00
SU-TU-BP-0-02207
DA500 EA
170
170
100 100
4
25/4
roll 3,90 SU-TU-BP-0-02220
DA500 EW
250
250
85 85
8
25/4
roll
3,90 SU-TU-BP-0-02222
DA500/25
500
120 4,5
25
8
25/2
roll
5,60 SU-TU-BP-0-06416
DA500/35
500
120
5,0
35
8
25/2
roll 6,90
SU-TU-BP-0-02224
Besaflex BS
Symbol
a1
[mm]
a2
[mm]
b1
[mm]
b2
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
EE 240 EA
120
120
50
50
4
25/6
roll
2,1
SU-TU-BP-0-06435
EE 240 EW
120
120
50
50
4
25/6
roll
2,1 SU-TU-BP-0-06436

Properties:
The Nitriflex type DA and the Besaflex BS type EE corner expansion joint sealing bands were designed to effectively protect structures at spots, where expansion joints were created at wall corners. Type EA and EW bands may be used in reinforced concrete components of varying thickness values.

 

Closing expansion joint sealing bands

Elastoflex
Symbol
a
[mm]
b
[mm]
k
[mm]
d
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FVK 5/2
55
20
10
5,0
35
2
25/10
roll
1,60
SU-TU-BP-0-02307
FAE 50
55
30 20
5,0
30
2
25/10
roll 1,70
SU-TU-BP-0-02282
FAE 70
70
30
20
5,0
30 2
25/8
roll
1,80 SU-TU-BP-0-0648
FAE 7/3
70
30
20
5,0
45
2
25/8
roll
1,90 SU-TU-BP-0-02308
FVK 7/4
70
40
30
5,0
45
2
25/6
roll
2,10
SU-TU-BP-0-02309
FVK 7/5
70
50
40
5,0
45
2
25/6 roll 2,20
SU-TU-BP-0-02310
FAE 100
105
30 20 5,0
30
4
25/4 roll 2,90
SU-TU-BP-0-02280
FAE 150
155
30
20
5,0
30
6
25/4 roll 3,40
SU-TU-BP-0-02280
FVK 15/7
150
70
60
5,0
35
6
25/3
roll 4,90
SU-TU-BP-0-02305

 

Properties:
The Elastoflex types FVK and FAE closing expansion joint sealing bands serve as supplementation of the expansion joint sealing system for joints protected by Elastoflex bands. They can constitute independent protection of expansion joints of ceiling slabs between storeys against rain water.

 

 

 

Besaflex 
Symbol
a
[mm]
b
[mm]
k
[mm]
l
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FV 20/20
50 20
10
5,0
25
2
25/10
roll 1,10 SU-TU-BP-0-02285
FV 20/20/70
70
20 10
5,0
25
2
25/10
roll
1,50
SU-TU-BP-0-02286
FV 20/30 50 20 10 5,0 35 2 25/10 roll 1,20 SU-TU-BP-0-02287
FV 20/40
70
20
10
5,0
45
2
25/10
roll
1,40
SU-TU-BP-0-02288
FV 30/20
50
30
20
5,0
25
2
25/10
roll
1,20
SU-TU-BP-0-02289
FV 30/30
50
30
20
5,0
35
2
25/10
roll
1,30
SU-TU-BP-0-02292
FV 30/40
70
30
20 5,0
45
2
25/10
roll
1,90
SU-TU-BP-0-02296
FV 40/40
70
40
30
5,0
45
2
25/10
roll
2,00
SU-TU-BP-0-02300
FV 50/40
70
50
40
5,0
45
2
25/8
roll 2,10 SU-TU-BP-0-02301
FV 30/20/2
95
30
20
5,0
25
4
25/6
roll 2,20
SU-TU-BP-0-02290
FV 30/30/2
95
30
20
5,0
35
4
25/6
roll
2,50
SU-TU-BP-0-02294
FV 40/30/2
95
40
30
5,0
35 4
25/6
roll
2,65
SU-TU-BP-0-02298
FV 60/30/2
140
60
50 5,0
35
4
25/6
roll
2,90
SU-TU-BP-0-02302
FV 30/20/3
140
30
20
5,0
25
4
25/6
roll
3,00
SU-TU-BP-0-02291
FV 30/30/3
140
30
20
5,0
35
6
25/6
roll
3,50
SU-TU-BP-0-02295
FV 30/40/3
140
30
20
5,0
45
6
25/6
roll
3,90
SU-TU-BP-0-02297
FV 40/30/3
140
40 30
5,0
35
6
25/6
roll 3,20
SU-TU-BP-0-02299
FV 70/20/3
140
70
60
5,0
25
6
25/5
roll
3,80
SU-TU-BP-0-02303
FV 80/20/3
140
80
70 5,0
25
6
25/4
roll 3,90
SU-TU-BP-0-02304
FV 110/20/3
140
110
100
5,0
25
6
25/5
roll
4,50
SU-TU-BP-0-02283

Properties:
The Besaflex type FV closing expansion joint sealing bands serve as supplementation of the expansion joint sealing system for joints protected by Besaflex bands. They can constitute independent protection of expansion joints of ceiling slabs between storeys against rain water.1)2)

Nitriflex
Symbol
a
[mm]
b
[mm]
k
[mm]
d
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FA50/10/25
50
20
10
5,0
25
2
25/10
roll 1,10 SU-TU-BP-0-02259
FA70/10/25
70
20
10
5,0
25
2
25/10
roll 1,10
SU-TU-BP-0-02270
FA50/10/35
50
20
10
5,0
35
2
25/10
roll
1,20
SU-TU-BP-0-02261
FA70/10/45
70
20
10
5,0
45 2
25/10
roll 1,20
SU-TU-BP-0-02260
FA50/20/25
50
30
20
5,0
25
2
25/10
roll 1,20
SU-TU-BP-0-02263
FA50/20/35
50
30
20
5,0
35 2
25/10
roll 1,30
SU-TU-BP-0-02266
FA70/20/45
70
30
20
5,0
45
2
25/10
roll
1,60
SU-TU-BP-0-02271
FA70/30/45
70
40
30 5,0
45
2
25/10
roll 1,90
SU-TU-BP-0-02272
FA70/40/45
70
50
40
5,0
45
2
25/10
roll 2,10
SU-TU-BP-0-02273
FA90/20/25
95
30 20
5,0
25
4
25/8
roll
2,20
SU-TU-BP-0-02274
FA90/20/35
95
30
20
5,0
35
4
25/6
roll
2,50
SU-TU-BP-0-02277
FA90/30/35
95
40
30
5,0
35
4
25/6
roll
2,70
SU-TU-BP-0-02279
FA130/50/35
140
60 50 5,0
35
4
25/6
roll
2,90
SU-TU-BP-0-06462
FA130/20/25
140
30
20
5,0
25
4
25/6
roll
3,10
SU-TU-BP-0-02252
FA130/20/35
140
30
20
5,0
35
6
25/6
roll
3,70
SU-TU-BP-0-02255
FA130/20/45 140
30
20
5,0
45
6
25/6
roll 3,80
SU-TU-BP-0-02257
FA130/30/35
140
40
30
5,0
35
6
25/6
roll 3,90
SU-TU-BP-0-02258
FA130/60/25
140
70
60
5,0
25
6
25/6
roll
4,00 SU-TU-BP-0-06466
FA130/70/25
140
80
70
5,0
25
6
25/6
roll 4,60
SU-TU-BP-0-06467
FA130/100/25
140
110 100
5,0
25
6
25/6
roll 4,80
SU-TU-BP-0-06468

Properties:
The Nitriflex type FA closing expansion joint sealing bands serve as supplementation of the expansion joint sealing system for joints protected by Nitriflex bands. They can constitute independent protection of expansion joints of ceiling slabs between storeys against rain water.1)2)

Nitriflex
Symbol
a
[mm]
b
[mm]
k
[mm]
l
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FA50/20/45-145
50
30
20
145
45
1
25/10
roll
2,40
SU-TU-BP-0-02269
FA50/10/35-100
50
20 10
95
35
1
25/10
roll
2,10 SU-TU-BP-0-02262

Properties:

The Nitriflex type FA closing sealing bands with single smooth expanded are should be used for single-side mechanical installation or gluing. In order to execute flush mounting and smoothing of the expansion joint components in the structure, the smooth arm has to be installed in an appropriate crevasse.1)2)

 

 

Nitriflex
Symbol
a
[mm]
b
[mm]
k
[mm]
l
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FA100/90/25/45
90
30
20
100
25
4
25/10
roll 3,70 SU-TU-BP-0-02251
FA100/130/20/25
140
30
20
100
45
6
25/10
roll 3,50 SU-TU-BP-0-02250

Properties:

The Nitriflex type FA closing sealing bands with expanded back should be used as additional protection of expansion joints in structures with sheet surface insulation of PE film. The use of sheet bitumen insulation requires the use of Nitroflex type FA bands in their BV version.1)2)

 

 

 

 

Nitriflex
Symbol
a
[mm]
b
[mm]
k
[mm]
l
[mm]
f
[mm]
Anchors Package 
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FA130/20/25-15 140
30
20
15,0 25
6
25/10
roll 3,20 SU-TU-BP-0-02254
FA130/20/35-15 140
30
20
15,0 25
6
25/10
roll
3,40 SU-TU-BP-0-02256

Properties:

Nitriflex type FA closing sealing bands with thickened back should be used as additional protection of expansion joints in structures under threat of liquids of elevated chemical or mechanical aggression.

 

 

 

 

 

 

Press-in expansion joint sealing bands

Nitriflex
Symbol
Joint width
[mm]
a
[mm]
b
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit
Weight
[kg/mb]
Art. no.
KLP10
7-12
20
17 25/10
roll
0,20
SU-TU-BP-0-02332
KLP15
9-14
20
20
25/10
roll 0,30
SU-TU-BP-0-02333
KLP20
13-17
25
25
25/10
roll 0,30
SU-TU-BP-0-02334
KLP25
17-22
30
30
25/10
roll 0,40 SU-TU-BP-0-02335
KLP30
19-25
30
35
25/10
roll 0,50
SU-TU-BP-0-02336
KLP35
19-25
35
35
25/10
roll 0,70
SU-TU-BP-0-02337
KLP40
19-25
40
60
25/8
roll 0,80 SU-TU-BP-0-02239
KLP50 25-34
40
50
25/6
roll 0,80
SU-TU-BP-0-02240
KLP55
24-29
45
55
25/6
roll 0,80
SU-TU-BP-0-02241
KLP60
24-29
50
60 25/6
roll 0,90
SU-TU-BP-0-02242
KLP90
34-40
60
90 25/6
roll 1,30 SU-TU-BP-0-02344
KLP35 E
19-24
35
40
25/10
roll 0,50
SU-TU-BP-0-02338
KLP90 E
25-34
35
100
25/6
roll 0,80
SU-TU-BP-0-02343

Properties:
The Nitriflex type KLP press-in expansion joint sealing bands are used for masking of protected expansion joints. The selection of appropriate Nitriflex type KLP sealing bands is conditioned on the effective expansion joint movement factor. These bands should be used at structures insulated by Nitriflex or Besaflex bands.

TPE
Symbol
Joint width
[mm]
a
[mm]
b
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
KLP10
7-12
20
17 25/10
roll 0,20
SU-TU-BP-0-06494
KLP15
9-14
20
20
25/10
roll
0,30
SU-TU-BP-0-06495
KLP20
13-17
25
25
25/10
roll 0,30
SU-TU-BP-0-06496
KLP25
17-22
30
30
25/10
roll
0,40 SU-TU-BP-0-06497
KLP30
19-25
30
50
25/10
roll 0,40
SU-TU-BP-0-06498
KLP35
19-25
35
35
25/10
roll 0,60
SU-TU-BP-0-06499
KLP40
19-25
40
60
25/8
roll
0,70
SU-TU-BP-0-06500
KLP50 25-34
40
50
25/6
roll
0,70
SU-TU-BP-0-08200
KLP55
24-29
45
55
25/6
roll
0,70
SU-TU-BP-0-06501
KLP60
24-29
50
60 25/6
roll
0,80
SU-TU-BP-0-06502
KLP90
34-40
60
90 25/6
roll 1,20
SU-TU-BP-0-06503
KLP35 E
19-24
35
40
25/10
roll
0,40
SU-TU-BP-0-06504
KLP90 E
25-34
35
100
25/6
roll
0,70
SU-TU-BP-0-06505

Properties:

The TPE type KLP press-in expansion joint sealing bands are used for masking of protected expansion joints. The selection of appropriate TPE type KLP sealing bands is conditioned on the effective expansion joint movement factor. These bands should be used at structures insulated by TPE or Elastoflex bands.

 

TPEart. no
Symbol
d1
[mm]
d2
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit
Weight
[kg/mb]
Art. no.
KLS 10/30 40 50 25/ roll
0,40
SU-TU-BP-0-06506

 

Properties:

The TPE type KLS press-in sealing band is used as a covering or support component for resins or putty covers, with expansion joints having a width of 15-35 mm.

 

 

 

Nitriflex
Symbol
Joint width
[mm]
a
[mm]
b
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
KLP10
7-12
20
15 25/10
roll 0,30
SU-TU-BP-0-02322
KLM 20
12-17
20
20
25/10
roll
0,50
SU-TU-BP-0-02324
KLM 25
17-21
27 25
25/10
roll 0,55
SU-TU-BP-0-02325
KLM 30
18-24
28
30
25/10
roll 0,60
SU-TU-BP-0-02326
KLM 40
28-34
35
40
25/10
roll 0,80
SU-TU-BP-0-02327
KLM 50
38-44
40 50
25/10
roll 0,90
SU-TU-BP-0-02328
KLM 60
48-54
45
60
25/8
roll
1,10
SU-TU-BP-0-02329
KLM 70
58-64
45
70 25/6 roll
1,30
SU-TU-BP-0-02330
KLM 80
68-74
60
80
25/6
roll 1,50
SU-TU-BP-0-02331
KLM 120
85-105
75
120 25/5
roll
2,20
SU-TU-BP-0-02323

Properties:

The Nitriflex type KLM press-in sealing bands are used as covering for expansion joints. An unbeatable advantage they offer is the fact that the entire band sits in the slit.

 

 

 

TPE
Symbol
Joint width
[mm]
a
[mm]
b
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
KLP10
7-12
20
15 25/10
roll
0,30
SU-TU-BP-0-06507
KLM 20
12-17
20
20
25/10
roll
0,50
SU-TU-BP-0-06508
KLM 25
17-21
27 25
25/10
roll
0,55
SU-TU-BP-0-06509
KLM 30
18-24
28
30
25/10
roll 0,60
SU-TU-BP-0-06510
KLM 40
28-34
35
40
25/10
roll 0,80
SU-TU-BP-0-06511
KLM 50
38-44
40 50
25/10
roll 0,90
SU-TU-BP-0-06512
KLM 60
48-54
45
60
25/8
roll 1,10
SU-TU-BP-0-06513
KLM 70
58-64
45
70 25/6 roll
1,30
SU-TU-BP-0-06514
KLM 80
68-74
60
80
25/6
roll
1,50
SU-TU-BP-0-06517
KLM 120
85-105
75
120 25/5
roll 2,20
SU-TU-BP-0-06518

 

Properties:

The TPE type KLM press-in sealing bands are used as covering for expansion joints. An unbeatable advantage they offer is the fact that the entire band sits in the slit.

 

 

Elastoflex
Symbol
Joint width
[mm]
a
[mm]
b
[mm]
Package
roll/pallete [mb/pcs.]

Sales
unit

Weight
[kg/mb]
Art. no.
HK 15
10
18
15 25/10
roll 0,40
SU-TU-BP-0-02313
HK 18
12
20
18 25/10
roll
0,50
SU-TU-BP-0-02314
HK 21 15
22
21
25/10
roll
0,60 SU-TU-BP-0-02315
HK 24
18-20
22
24
25/10
roll
0,70
SU-TU-BP-0-02316
HK 30
22-24
28
30
25/10
roll 0,90 SU-TU-BP-0-02317
HB 40
25-30
30
40
25/10
roll
1,20 SU-TU-BP-0-02318
HK 50
30-40
38
50
25/8
roll
1,70
SU-TU-BP-0-02319
HK 60
40-50
48
60
25/6 roll
1,70
SU-TU-BP-0-02320
HK 75
50-60
60
75 25/6
roll
2,50
SU-TU-BP-0-06526

 

Properties:

The Elastoflex type HK press-in sealing bands are used as covering for expansion joints. An unbeatable advantage they offer is the fact that the entire band sits in the slit.

 

 

 

Mechanically-mounted sealing bands

Nitriflex
Symbol
a
[mm]
c
[mm]
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FL100 - GG
100
4,0
25/40
roll
0,60
SU-TU-BP-0-06527
FL150 - GG
150
4,0
25/30
roll
0,90
SU-TU-BP-0-02039
FL200 - GG
200
4,0
25/20
roll 1,20
SU-TU-BP-0-02040
FL250 - GG
250
4,0
25/20
roll
1,70
SU-TU-BP-0-06528
FL280 - GG
280
4,0
25/20
roll 1,90
SU-TU-BP-0-06529
FL300 - GG
300
4,0
25/16
roll
2,00
SU-TU-BP-0-06537
FL350 - GG
350
4,0
25/16
roll
2,00
SU-TU-BP-0-06530
FL400 - GG
400
4,0
25/16
roll
2,40
SU-TU-BP-0-06531
FL500 - GG
500
4,0
25/8 roll
2,80
SU-TU-BP-0-06532

Properties:

Nitriflex type FL external day joint insulation bands are used for sealing day joints and apparent expansion slits against intrusion by water under pressure. These bands should be used with a pressure structure on both sides, guaranteeing compression on to the surface that would be equal to or higher than the water pressure.
The mechanically installed bands are in most cases utilised for sealing divisions where newly constructed structure parts meet existing parts. They can be affixed to the base surface using adhesive, but such a joint only provides resistance against rain water that is not under hydrostatic pressure. Nitriflex type FL bands should be used at structures, the day joints of which are protected by Besaflex and Nitriflex day joint and expansion joint bands.

Elastoflex
Symbol
a
[mm]
c
[mm]
Package
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
FLK 100 - GG
100
4,0
25/40
roll 0,60
SU-TU-BP-0-06541
FLK 200 - GG
200
4,0
25/20
roll 1,20 SU-TU-BP-0-06542
FLK 250 - GG
250
4,0
25/20
roll 1,40 SU-TU-BP-0-06543
FLK 280 - GG
280
4,0
25/20
roll 1,60 SU-TU-BP-0-06544
FLK 300 - GG
300
4,0
25/16
roll
1,80 SU-TU-BP-0-06545
FLK 350 - GG
350
4,0
25/16
roll 2,00 SU-TU-BP-0-06546
FLK 400 - GG
400
4,0
25/16
roll
2,20 SU-TU-BP-0-06547
FLK 500 - GG
500
4,0
25/8 roll
2,80 SU-TU-BP-0-06548

Properties:

The Elastoflex type FLK external day joint sealing bands are used for sealing day joint and apparent expansion slits against intrusion by water under pressure. These bands should be used with a pressure structure on both sides, guaranteeing compression on to the surface that would be equal to or higher than the water pressure. The mechanically installed bands are in most cases utilised for sealing divisions where newly constructed structure parts meet existing parts.
They can be affixed to the base surface using adhesive, but such a joint only provides resistance against rain water that is not under hydrostatic pressure. Elastoflex type FLK bands should be used at structures, the day joints of which are protected by Elastoflex day joint and expansion joint bands.

Nitriflex
Symbol
a
[mm]
c
[mm]
k
[mm]
h
[mm]
Package
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
BOD 150 - GG
150
5,0
20
30 25/5 roll 25/2
SU-TU-BP-0-02163
BOD 240 - GG
240 5,0
30
50 25/5
roll
25/2
SU-TU-BP-0-02155
BOD 320 - GG
320 5,0
30
55
25/2
roll
3,20
SU-TU-BP-0-02159
BOD 360 - GG
360 5,0
35 55
25/2
roll
3,60 SU-TU-BP-0-02160
BOD 500 - GG
500
6,0
50 55
25/2
roll 5,10 SU-TU-BP-0-02162

Properties:

The Nitriflex type BOD external expansion joint sealing bands are used for sealing expansion slits with high movement compensation requirements, in which the band cannot be concreted for process technical reasons. It is to be used in cases corresponding to Nitriflex type FL sealing bands.

 

Nitriflex
Symbol
a
[mm]
c
[mm]
k
[mm]
h
[mm]
Package
roll/pallete [mb/pcs.]
Sales
unit

Weight
[kg/mb]
Art. no.
BOD 300 - GG 300
2,5
28
30
25/3 roll 1,60 SU-TU-BP-0-02157
BOD 400 - GG 400
5,0
80
25
25/3 roll
2,10 SU-TU-BP-0-02161

Properties:

The Nitriflex type BOD external expansion joint sealing bands are used for sealing expansion slits, in which the band cannot be concreted for process technical reasons. It is to be used in cases corresponding to Nitriflex type FL sealing bands.

 

 

Mechanically installed sealing bands - special solutions

Internal sealing band for day joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
KFB 330-G 25/5
roll
3,50
SU-TU-BP-0-02321
Internal sealing band for day joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
A450 KL-G 25/2
roll
5,2 SU-TU-BP-0-06640
External sealing band for day joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AA240-G 25/4
roll
1,90 SU-TU-BP-0-02074
External sealing band for day joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AA 320-G 25/4
roll
3,00  SU-TU-BP-0-02083
Internal sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FM 350 KF-G 25/4
roll
3,80 SU-TU-BP-0-06641
Internal sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AM 350-G 25/15
roll 3,00 SU-TU-BP-0-06647
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA240-G 25/4
roll 2,00 SU-TU-BP-0-06642
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA320-G 25/4
roll 3,10  SU-TU-BP-0-06643

 

Mechanically installed sealing bands

External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA320-GG 25/4
roll
1,80 SU-TU-BP-0-08201
 
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AMG 350-GG 25/4
roll 2,20 SU-TU-BP-0-08202
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
OMEGA380-GG 25/4
roll
2,80 SU-TU-BP-0-06661
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
A500 KL-GG 25/2
roll
2,90 SU-TU-BP-0-02061
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FM 350 KF2 -GG 25/4
roll 3,80
SU-TU-BP-0-08203
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
OK 250-GG 25/5
roll -
SU-TU-BP-0-06663
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
OK 300-GG 25/4
roll -
SU-TU-BP-0-06664
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
OK 350-GG 25/4
roll -
SU-TU-BP-0-06665

 

Mechanically installed sealing bands - special solutions

Internal sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
D 330 E-G 25/8
roll
2,60
SU-TU-BP-0-02179
Internal sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FM 350 K-G 25/5
roll 5,20
SU-TU-BP-0-08204
Internal sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
F 500 K-G 25/4
roll
6,40
SU-TU-BP-0-06651
Internal sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FM 500 K-G 25/4
roll 6,40
SU-TU-BP-0-06650

Mechanically installed sealing bands

External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA330/35 E-G 25/8
roll
3,60
SU-TU-BP-0-02216
External sealing band for expansion joints Nitriflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
DA330/35 EA-G 25/8
roll 3,60
SU-TU-BP-0-02217
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AM 350 K-G 25/5
roll 4,00
SU-TU-BP-0-08205
External sealing band for expansion joints Elastoflex
Symbol
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AM 350 KA-G 25/5
roll 4,00
SU-TU-BP-0-06658

 

Sealing bands joined with sheet insulation

Besaflex
Symbol
a
[mm]
e
[mm]
c
[mm]
f
[mm]
Anchors
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FAP60
60
40
4,0
20
2
25/15
roll 0,80
SU-TU-BP-0-07008
FAP80
80
50
4,0
20
2
25/10
roll 0,90
SU-TU-BP-0-07009
FAP100
100
60
4,0
20
2
25/10
roll
1,00
SU-TU-BP-0-07010
FAP140/3
140
50
4,0
20
3
25/6
roll 1,20 SU-TU-BP-0-07011
FAP140/30/3 140 50 4,0
30
3
25/6
roll
1,40
SU-TU-BP-0-07012

Properties:

The Besaflex type FAP external day joint sealing bands are used for concreting within reinforced concrete structures with external sheet insulation. The band is concreted in the spots, where additional film sheets are attached, or at their ends, in order to weld these together. The choice of Besaflex type FAP sealing bands is dependent on the environment aggression conditions. They are used in structures protected by Besaflex day joint and expansion slit bands.

Nitriflex
Symbol
a
[mm]
e
[mm]
c
[mm]
f
[mm]
Anchors
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
FAPN 60 60
40
4,0
20
2
25/15
roll
0,80
SU-TU-BP-0-07013
FAPN 80 80
50
4,0
20
2
25/10
roll
0,90
SU-TU-BP-0-07014
FAPN 100 100
60
4,0
20
2
25/10
roll
1,00
SU-TU-BP-0-07015
FAPN 140/3 140
50
4,0
20
3
25/6
roll
1,20 SU-TU-BP-0-07015
FAPN 140/30/3 140 50 4,0
30
3
25/6
roll
1,40
SU-TU-BP-0-02066

Properties:

The Nitriflex type FAPN external day joint sealing bands are used for concreting within reinforced concrete structures with external sheet insulation. The band is concreted in the spots, where additional film sheets are attached, or at their ends, in order to weld these together. The choice of Nitriflex type FAPN sealing bands is dependent on the environment aggression conditions. They are used in structures protected by Nitriflex day joint and expansion slit bands.

Polyflex
Symbol
a
[mm]
e
[mm]
c
[mm]
f
[mm]
Anchors
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
AAP60 60
40
4,0
20
2
25/15
roll
0,80
SU-TU-BP-0-07016
AAP80 80
50
4,0
20
2
25/10
roll
0,90
SU-TU-BP-0-07017
AAP100 100
60
4,0
20
2
25/10
roll 1,00
SU-TU-BP-0-06964
AAP140/3 140
50
4,0
20
3
25/6
roll
1,20 SU-TU-BP-0-06965
AAP140/30/3 140 50 4,0
30
3
25/6
roll 1,40
SU-TU-BP-0-07018

Properties:

The Polyflex type AAP external day joint sealing bands are used for concreting within reinforced concrete structures with external sheet insulation. The band is concreted in the spots, where additional film sheets are attached, or at their ends, in order to weld these together. The choice of Polyflex type AAP sealing bands is dependent on the environment aggression conditions.
They are used in structures protected by Polyflex day joint and expansion slit bands. Upon special customer order, these bands may be manufactured of HDPE.

Polyflex
Symbol
a
[mm]
e
[mm]
c
[mm]
f
[mm]
Anchors
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
SAA400 400 110 4,0
30
6 25/3
roll
5,30 SU-TU-BP-0-07019
SAA500 500 170 4,0
30
6 25/2
roll
5,70 SU-TU-BP-0-07020
SAA600 500 270 4,0
30
6 25/2
roll
7,20 SU-TU-BP-0-07021

Properties:

Taśmy uszczelniające do przerw roboczych zewnętrzne Poliflex typ SAA służą do uszczelnienia przerw roboczych w konstrukcji żelbetowej z zewnętrzną izolacją arkuszową. W celu zapewnienia ciągłości izolacji arkuszowej należy dogrzać ją do gładkiej strony taśmy uszczelniającej.

 

 

Polyflex
Symbol
a
[mm]
e
[mm]
c
[mm]
f
[mm]
Anchors
Package
roll/pallete [mb/pcs.]
Sales
unit
Weight
[kg/mb]
Art. no.
SDA400 400 110 4,0
30
6 25/3
roll
5,30 SU-TU-BP-0-07022
SDA500 500 170 4,0
30
6 25/2
roll
6,20
SU-TU-BP-0-07023

Properties:

The Polyflex type SDA external day joint sealing bands are used for sealing expansion slits within reinforced concrete structures with external sheet insulation. In order to provide continuity of sheet insulation, it should be heat welded to the smooth side of the sealing band.

 

Notes to tables
1) Detailed information characterising the individual materials can be found in the tables in the Material overview tab.
2) Soft PVC sealing bands may not come into contact (react) with chlorinated hydrocarbons (i. e. bitumen compounds, petrol). In order to ensure durability of sealing bands, for which there exists the risk of contact with the substances indicated above, one should use material that is resistant to bitumen compounds. In the retail range, the band symbol is suffixed with the letters BV. Information, whether a BV type band is requires, should be given with the order.