Components Of The Secumax Individual System

Barrier pillar

Barrier pillar
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Barrier pillar pcs. 4,040
1BH-SX-00-0-00914

The barrier pillar is a basic side protection system component. This product conforms to strength requirements for class A according to standard PN-EN 13374, and hence it corresponds to safety requirements for protective barriers.
The pillar has an automatic safety component, which locks it in the grip and prevents it from accidentally slipping away from the mounting grip. It is also equipped with hooks for mounting safety hand rails of planks with cross section dimensions of 32 x 150 mm, as well as mobile protection measures against accidental removal of planks upwards.
The hook width is adapted to an overlay joint of two planks with a width of 32 mm each. The pillar structure also allows the installation of safety nets.


 

 

 

Type 500 screw-in grip

Type 500 screw-in grip
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Type 500 screw-in grip pcs. 7,20
BH-SI-00-0-00892
Plastic pipe K 34
pcs. 0,012
BH-SI-00-0-05916

The type 500 screw-in grip allows the installation of the barrier pillar at a height of 500 mm above the horizontal work surface. This component is screwed onto four anchors embedded earlier, i. e. the Hilti HSC M12x60 or others with similar or better resistance characteristics. It is screwed in place with a s = 19 mm wrench with a torque of 35 Nm. The grip is equipped with an eye to guide the safety rope. Its durable zinc coat allows long years of use as an edge protection system component.

The synthetic material cap protects the inside of the sleeve mounting the barrier pillar against adverse influence of atmospheric conditions outside of periods, when the grip is in use. The cap is available upon request.


Advantages:

 

  • the grip allows the execution of installation and maintenance work without reducing the quality of insulation surfaces,
  • quick and easy installation with the use of a standard anchor.

 


 

Type 260 universal side grip steel seat 

Type 260 universal side grip steel seat 
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Type 260 universal side grip steel seat  pcs. 4,250
BH-SI-00-0-00893

The seat is foreseen for installation of different components on surfaces through welding or by screw connections. It allows embedding of a side grip at a distance of 270 mm from the outside wall surface. A durable galvanic coat (applied by hot-dip galvanising) ensures long years of use.

Advantages:

 

  • the extension allows execution of installation and maintenance work without reduction of quality of insulation layers,
  • long-term use,
  • quick and easy installation with the use of a standard anchor.

 

 

Round rosette

Round rosette
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Round rosette pcs. 0,1200
BH-SI-00-0-05914

The round rosette is adapted for use with Secumax Individual components. It is made of galvanised steel or stainless steel, guaranteeing long-term use - irrespective of any influences and mean environmental conditions in Poland.

Advantages:

 

  • quick and simple installation with the use of a standard expansion dowel and/or bolt,
  • long-term use,
  • proper protection of insulation layers.

 

 

 

Square rosette

Square rosette
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Square rosette pcs. 0,1500
BH-SI-00-0-05915

The square rosette is adapted for use with components of the Secumax Individual system. It is made of steel covered with a galvanic coat or from stainless steel, which guarantees long-term use - irrespective of any influences and mean environmental conditions in Poland.

Advantages:

 

 

 

 

  • quick and simple installation with the use of a standard expansion dowel and/or bolt,
  • long-term use,
  • proper protection of insulation layers.

 

 

Side grip seat

Side grip seat
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Side grip seat pcs. 0,040
BH-SX-00-0-00897

 

The seat is used to install a type 290 side grip extension. It is embedded between the support structure rebar components. The dimensions to be maintained are indicated in the diagram.

Note:

The grip seat must be mounted on the formwork in such a way so that the side with the inscription 'Oben/Góra' points upwards.

Advantages:

 

  • simple seat installation on formwork inside surface,
  • seat material is resistant to many chemical factors.

 



Type 290 side grip extension

Type 290 side grip extension 
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Type 290 side grip extension pcs. 3,800 BH-SI-00-0-00906

Extension used for mounting a side grip. Allows its use at a distance of 290 mm from the interior surface of the wall, in which the side grip seat is embedded. Durable galvanic coat (made through hot-dip galvanising) ensures long life.

Advantages:

 

  • extension allows execution of installation and maintenance works without damaging insulation coats,
  • long usable life,
  • quick and easy installation with the use of the grip seat.

 

Side grip (registered model)

Side grip (registered model)
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Side grip  pcs. 1,120 BH-SX-00-0-00916

Thanks to side mounting of the barrier pillar, the side safety devices do not hinder works on stairs or other work surfaces.

The installation surfaces may be protected with a safety barrier until the works are completed, the grip is affixed to the side surface, i. e. of stair flights.

Maximum separation: 2000 mm.

Advantages:

 

  • installation of pillar grip at any time (during removal of formwork or during installation of safety barriers),
  • thanks to side mounting of the barrier pillars, the safety devices do not hinder works carried out on the horizontal surface of the room or the flight of stairs, and allow safe execution of works up until the moment if installation of target barriers.

 





Betomax protective plank

Betomax protective plank
Symbol
Sales unit Weight [kg/psc.]
Art. no.
Betomax protective plank pcs. 5,5 ÷6,5
BH-SX-00-0-00894
Protective plank with company logo pcs. 5,5÷6,5 -

Betomax protective planks, used for safety handrails and kerb planks, are made of at least C-18 class wood, and have minimum dimensions of 32 x 150 x 2500 mm and 32 x 150 x 1500 mm.
Upon request, the safety planks may have the company name placed on them.
In order to estimate the number of planks for a required structure, the following formulae may be used:
A=(L/2)+1, where A - number of barrier pillars, L-length of required structure in metres;
Should one want to use three planks for the structure, then one should use the following formula:
X=(A-M)*3, where X - plank count, M - barrier count.
Should one want to use two planks for a structure (i. e. flights of stairs), then one should use the following formula:
X=(A-M)*2, where X - plank count, M - barrier count.
A barrier is a single structure of an edge protection system.



Harip 540 anchor rope

Harip 540 anchor rope
Symbol
Sales unit Weight [kg/psc.]
Art. no.
HARIP BF 540 10 m anchor rope 
pcs. 1,7
BH-SI-00-0-05917
HARIP BF 540 20 m anchor rope pcs. 3,9
BH-SI-00-0-05918
HARIP BF 540 30 m anchor rope pcs. 6,1
BH-SI-00-0-05919

The ø 16 mm polyamide rope is equipped with a tensioning mechanism and steel coupling components. The rope is foreseen for a single worker. The component complies with requirements of standard PN-EN 795, is CE-certified for safety. Rope lengths: 10 m, 20 m and 30 m.
For safe use of Secumax Individual anchor points, the use of safety suspensions, ropes and joining components (carabiners, thimbles, shackles) is necessary. All named components must have the CE safety certification.