Product Range

Plastic-metal cone

Plastic-metal cone
Symbol
Thread
Package
bag [pcs.]

Sales
unit

Weight
[kg/pcs.]

Art. no.
FCB B15
B15
25
pcs.
0,500 AS-ZJ-00-0-00852
FCB B20
B20
25
pcs.
0,770
AS-ZJ-00-0-00853
FCB B26,5
B26,5
10
pcs.
1,670
AS-ZJ-00-0-00854

 

The plastic-metal cone is used to join two threaded bars in the Betomax system. The assembly and removal of the cone should take place using the FCB cone wrench. In order to install the cone, the FCB grip is used. In order to avoid contamination of the cone outside thread, the FCB cap can be used. In case of usage of the B15 and SGS15 tie cone, use the FCB B15 washer, which shall perfectly seal the cone against rough surfaces and is angle-adjustable up to 3°. To cap off the opening left over after removal of the cone, use the special structural concrete plug for the FCMB, FCB and EX-WU cones, glued in place using the A+B adhesive, or alternatively use filler mortar.
 
Usage:
The FCB cone finds broad use. It is used as a joining component between single-side anchors and the components affixed to the anchor (hanging scaffolding, advertisements). It can also be used during installation of formwork panels as a joint between the tie and the contact nut, which is screwed onto the stud made from the B15 or SGS15 ties, extending from the cone and protruding through the formwork panel.

Cone dimensions FCB
a
[mm]

 D
 [mm]

d
[mm]

c
[mm]

SW
[mm]

FCB B15
95
61
40
50 27
FCB B20
126
70
42
65
32
FCB B26,5
135
103
57
70
46

 

 

FCB nailing grip.

FCB nailing grip.
Symbol
Thread
Dimensions
a x b x s [mm]

Package
[pcs.]

Sales
unit

Weight
[kg/pcs.]

Art. no.
FCB B15
B15
58 x 25 x 3
1
pcs.
0,100 AS-ZJ-00-0-00862
FCB B20
B20
70 x 27 x 3
1
pcs.
0,190
AS-ZJ-00-0-00861
FCB B26,5
B26,5
100 x 27 x 3
1
pcs.
0,200
AS-ZJ-00-0-00863

 

Steel grip, through the use of which the FCB cone can be affixed to the formwork panel. First up, nail the grip to the formwork panel, and then screw the cone onto the grip thread.

Usage:
The grip is used for installation of single-side anchors, where the necessity emerges to affix an anchor with a cone to the formwork panel.

 

 

Cap

Cap
Symbol
Dimensions
a x s [mm]

Package
bag [pcs.]
Sales
unit

Weight
[kg/pcs.]
Art. no.
FCB B15
63 x 2
50
bag
0,004 AS-ZJ-00-0-00873
FCB B20
68 x 2
50
bag 0,006
AS-ZJ-00-0-00874
FCB B26,5
103 x 2
50
bag 0,011
AS-ZJ-00-0-00875

 

The FCB cap is made of synthetic material. It prevents penetration of concrete to the inside of the FCB cone. The cap is compatible with all types of ties available from Betomax.

Usage:
For protection of the FCB cone thread against contamination.

 

 

 

Cone seal

Cone seal
Symbol
Package
bag [pcs.]
Sales
unit
Weight
[kg/pcs.]
Art. no.
FCB  B15
25
bag
0,053 AS-ZJ-00-0-00849

 

Cone seal
The cone seal is used to tighten the FCB cone on rough surfaces. It has an ability to adapt up to 3°. The seal is used only for B15 cones.

Usage:
For sealing FCB cones with the B15 thread.

 

 

 

Metal cone

Metal cone
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
FCMB
1
pcs.
1,270 AS-ZJ-00-0-00858
M24 screw, L = 55 mm
1
pcs.
0,320
AS-ZJ-00-0-00859

 

Metal cone
The metal cone is used in order to join on the one side the tie, and on the other side the threaded bar or the M24 metric thread screw. Installation and removal of the cone should be effected using the FCMB cone wrench. Use the FCMB grip to affix the cone. The opening left over after removal of the cone should be plugged with a special structural concrete plug for the FCMB, FCB and EX-WU cones, glued by the A+B adhesive. Cone strength is equal to the resistance of the formwork ties. The cone's durability allows its multiple use.

Usage:
May be used as an end piece for single-side anchors, to which then a component may be attached, using screws or a threaded bar with a M24 thread.

 

 

 

 

 

Nailing grip

Nailing grip
Symbol
Thread
Dimensions
a x b x s [mm]

Package
[pcs.]

Sales
unit

Weight
[kg/pcs.]

Art. no.
FCMB M24
M24
80 x 25 x 3
1
pcs.
0,150 AS-ZJ-00-0-00865

 

Grip made of metal, thanks to which the FCMB cone may be mounted onto a formwork panel. First up nail the grip to the formwork panel, and then screw in the FCMB cone.

Usage:
For installation of the FCMB cone to the formwork. This method is used for single-side anchoring

 

 

 

Anchor sleeve and assembly cap

Anchor sleeve and assembly cap
Symbol
Package
bag [pcs.]
Sales
unit
Weight
[kg/pcs.]
Art. no.
Anchor sleeve FORBOLD-C 50
pcs. 2,550 AS-ZJ-00-0-00836
Assembly cap FORBOLD-C 50
pcs. 0,350
AS-ZJ-00-0-00837

An anchor sleeve compatible with the D&W system. Made of synthetic material reinforced with fibreglass. The openings in the FORBOLD-C anchor sleeve are there to install tie wire to the component's main rebar using the sleeve.

Usage:
For single-side anchors in conjunction with the B15 tie. Ideal for use for ceiling formwork, scaffoldings and single-side formwork.

 

 

Wavy anchor

Wavy anchor
Symbol
Thread
Dimensions Package
[pcs.]
Sales
unit
Weight
[kg/pcs.]
Art. no.
L[mm]
a [mm]
B15
B15
550
95
1
pcs. 0,852
AS-ZJ-00-1-00180
B20
B20
700
170
1
pcs. 1,820
AS-ZJ-00-1-00181
B26,5
B26,5
800
220
1
pcs. 4,600
AS-ZJ-00-1-00182

 

A wavy anchor is made of a weldable B15, B20 or B26,5 threaded bar.

Usage:
Foreseen for single-side anchoring in concrete. Used as stay-in-place (internal) anchor, together with cones it is used to anchor slip formwork, working platforms, etc.

 

Hook anchor

Hook anchor
Symbol
Thread
Dimensions Package
[pcs.]
Sales
unit
Weight
[kg/pcs.]
Art. no.
L[mm]
a [mm]
B15 L=250
B15
250
150
1
pcs. 0,670
AS-ZJ-00-1-00183
B15 L=450
B15
450
150
1
pcs. 0,980
AS-ZJ-00-1-00184
B20
B20
500
190
1
pcs. 2,250
AS-ZJ-00-1-00185
B26,5
B26,5
650
250
1
pcs. 4,630
AS-ZJ-00-1-00186

 

Made of a weldable B15, B20 or B26,5 threaded bar, it is bendable.

Usage:
Broad scope of use just as with the wobble anchor - however, it is perfectly suited for lower thickness walls.

 

 

Plate anchor

  Plate anchor
Symbol
Thread
Package
[pcs.]
Sales
unit
Weight
[kg/pcs.]
Art. no.
Plate anchor 100
B15 1
pcs.
0,940
AS-ZJ-00-0-00846
Plate anchor 160
B15
1
pcs.
1,060
AS-ZJ-00-0-00847
Plate anchor 400
B15
1
pcs.
1,300
AS-ZJ-00-0-00848

 

Composed of a B15 threaded welded bar and a plate with dimensions of 90 mm x 120 mm x 10 mm.

Usage:
Anchor is perfect for single-side anchoring using slip formwork and structures with limited wall thickness values.

a x b [mm]
t [mm]
L [mm] I [mm]
Vt [mm]
 90 x 120
10
110
100
150
90 x 120
10
170
160
210
90 x 120
10
410
400
450

Vt - minimum anchoring depth.

When the maximum force value is reached, the break occurs at the bar, not at the weld.

B20 anchor element

B20 anchor element
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 B20
1
pcs.
1,480
AS-ZJ-00-0-00840

 

The anchor element is made of a flat anchor bar with a B20 hexagonal nut welded on. It is used for single-side anchoring and it is compatible with the Betomax tie.
Breaking force:
- 235 kN in concrete with no rifts or cracks
- 177 kN / 181 kN in concrete with rifts and cracks (cone torn away limited to ø 850 mm).
(according to test certificate, concrete tearing occurred at force 177 kN, concrete class C20/25).

 

Concrete resistance: 30 N / mm2
Minimum anchor depth: 175 mm

Usage:
Perfect for use with the V grip at 45°.
Maximum load is dependent on concrete class and anchoring depth (Vt).

 

B26,5 anchor element

B26,5 anchor element
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
B26,5
1
pcs.
1,320
AS-ZJ-00-0-00841

Cast element for single-side anchoring, compatible with the D&W 26,5 system.

Usage:
Perfect for use with the V grip at 45°.
Maximum load is dependent on concrete class and anchoring depth.

 

 

M24 anchoring element

 M24 anchoring element
Symbol
Thread
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 M 24
M 24 1
pcs. 1,400
AS-ZJ-00-0-00842
M24 screw, L = 70 mm
M24
1
pcs. 0,350
AS-ZJ-00-0-00860

 

Made out of an anchor plate with a welded-on sleeve with an M24 thread. Before installation of the part on the formwork using the M24 grip, the anchor component should be ended off with the IN 26 end piece. After removal of the formwork, attach i. e. scaffolding or platforms using M 24 x 70 screws to the hardened concrete surface. After work is completed, the opening should be plugged using the STOPF 26 plug.

Usage:
Used for single-side anchor requirements.

 

 

Nailing grip

Nailing grip
Symbol
Thread
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 M 24
M 24 1
pcs.
0,200
AS-ZJ-00-0-00866

 

The nailing grip is made of metal, using it one can nail the FCMB cone and the M24 anchoring component accordingly. First up, nail the grip to the formwork panel, and afterwards screw the FCMB cone or the M24 anchor component onto the grip thread.

Usage:
The grip is used for installation of single-side anchors, where the necessity exists of affixing an anchor along with a cone to the formwork panel.

 

 

FITSCH grip

FITSCH grip
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 FORBOLD-F B15
1
pcs.
0,400
AS-ZJ-00-0-00867

The FORBOLD-F grip is executed as a weldable forging using S355J2C steel with a threaded opening. Compatible with the D&W 15 system.
The grip should be welded along its entire circumference using an a=4 mm weld.

Usage:
For installation of ties to steel components by welding.

 

 

   B 15 anchor bolt

    B 15 anchor bolt
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 B15
50
pcs. 0,333
AS-ZJ-00-0-00843


Anchor bolt compatible with the B15 formwork tie, made of metal, galvanised.

Usage:
The anchor is used for single-side affixing of formwork to rock faces or concrete walls
Boring depth/Load values:Opening diameter ø 36,5 mm - 38 mm, recommended bit size no. 36;
Opening boring depth
In concrete, up to 90 kN, at least 20 cm for concrete class C20/25.
Rock boring depth depending on rock strength:
In rock over 91 kg/cm2: at least 2,0 m
In rock over 68 kg/cm2: at least 2,5 m
In rock over 45 kg/cm2: at least 3,0 m

 

 

 

 

 

 

 

V grip

V grip
Symbol
Thread
Outer diameter
d1 [mm]

Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
 B15
B15
25
1
pcs. 0,420
AS-ZJ-00-0-00868
 B20
 B20
32
1
pcs. 0,420
AS-ZJ-00-0-00869
B26,5
B26,5
40
1
pcs. 0,420
AS-ZJ-00-0-00870

 

The V grip is composed of a sheet steel band and a synthetic material grip. Used for anchor components for single-side formwork.

Usage:
Used to install anchor bolts, anchor loops, wobble anchors and hook anchors, etc., at an angle of 45°.

 

 

 

FCB cone plug

MKK cone plug
Symbol
Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
45/B15
1
pcs.
0,420
AS-ZJ-00-0-00872 AS-ZJ-00-0-00872

 

The FCB cone plug is made of synthetic material. The 45° plug protects the FCB cone thread against contamination during concreting, when the cone is angled at 45° with respect to the surface.


Usage:
Used in conjunction with the V grip.

Thread a [mm]
b [mm] c [mm]
Фd [mm] D [mm]
B15
5
70
14
30
65

 

 

Anchor loop

Anchor loop
Symbol
Thread
Dimensions
Destructive force
[kN]

Calculated value
[kN]

Package
[pcs.]

Sales
unit
Weight
[kg/pcs.]
Art. no.
A [mm]
B [mm]
C [mm]
D [mm]
B15
B15
285
400
302
224
160
85
1
pcs. 2,35
AS-ZJ-00-1-00187
B20
B20
325
440
300
280
300
150
1
pcs. 4,11 AS-ZJ-00-1-00188
B26,5
B26,5
485
485
455
300
520
245
1
pcs. 8,80
AS-ZJ-00-1-00189

 

The anchor loop is made of a weldable B15, B20 or B26,5 threaded bar, which is bendable.

Usage:
Used to affix walls of single-side formwork systems to bottom slabs.
Assembly takes place during the first phase of concreting of the bottom slab.