This water-tight profile is made up of aluminium form profiles, a Nitriflex synthetic material inlay and protective covers made of stainless steel. It is used for the execution of expansion slits in surfaces with any kind of finish. It is characterised by an aesthetically pleasing design and full water tightness.
The profile finds use in parking lots, multi-storey parking lots, underground parking lots, pedestrian overpasses, ramps, swimming pools and in wet rooms where water resistance is required. The profile can also be used with asphalt top layers.
The synthetic material inlay is joined into one section through welding. Should it become necessary, the sealing inlay may be replaced during site operation without damage to the neighbouring floor surfaces or the top layer. The inlay is also available in a version with long bands.
It is also possible to replace the protective stainless steel covers. The stainless steel covers may in addition be executed as non-slip covers.
The profile is resistant to traffic salt, aggressive agents (i. e. petrol) and other external influences.
It is also possible to execute complicated water-tight mounting shape profiles.
The use of full stainless steel covers prevents the transfer of vertical movements, i. e. in case of uneven building setting.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile available in flat and corner form.
Adhere to notices and remarks concerning installation.
|Flat bar profiles||500/NcL-070||500/NcL-070W
|Corner profiles||E 500/NcL-070
||Nominal expansion slit width||70
||Total expansion profile width||220
||Visible profile width after installation||110
||Total expansion profile width||145
||Visible profile width after installation||90
|W ± [mm]
||Expansion slit movement compensation||40(±20)
|Colour||stainless steel - natural; aluminium - natural; elastic inlay - black|
|Material||Load bearing elements – aluminium
Nitriflex elastic inlay - permanently elastic material, resistant among others to oils, bituminous masses, oxidation, acids, UV light, atmospheric conditions and temperature (to +65 °C) as well as aging and road salt.
Covers - stainless steel.
|Standard length [m]||Load bearing elements - 2 and 4, covers - 4, inlay - 50|
|DEFLEX E 500/NcL-070|