Deflex 500/nc


Technical description

This water-tight profile is made up of aluminium form profiles, a Nitriflex synthetic material inlay and protective covers made of stainless steel. It is used for the execution of expansion slits in surfaces with any kind of finish. It is characterised by an aesthetically pleasing design and full water tightness. The profile finds use in parking lots, multi-storey parking lots, underground parking lots, pedestrian overpasses, ramps, swimming pools and in wet rooms where water resistance is required. The profile can also be used with asphalt top layers.
The synthetic material inlay is joined into one section through welding. Should it become necessary, the sealing inlay may be replaced during site operation without damage to the neighbouring floor surfaces or the top layer. The inlay is also available in a version with long bands.
It is also possible to replace the protective stainless steel covers. The stainless steel covers may in addition be executed as non-slip covers.
The profile is resistant to traffic salt, aggressive agents (i. e. petrol) and other external influences.
It is also possible to execute complicated water-tight mounting shape profiles. The profile is characterised by an optimum fusion of such parameters as high load bearing capacity and the ability to take on high shifts (expansion slit movement compensation) against the visible profile width after installation, while full water resistance is maintained.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 500/Nc-070 500/Nc-070W
Corner profiles E 500/Nc-070
E 500/Nc-070W
Fb [mm]
Nominal expansion slit width 70
70



B [mm]
Total expansion profile width 220
220
S [mm]
Visible profile width after installation 110
110
H [mm]
Installed height 75
75



BE [mm]
Total expansion profile width 145
145
SE [mm]
Visible profile width after installation 90
90
HE [mm]
Installed height 143
143
W ± [mm]
Expansion slit movement compensation 40(±20)
80(±40)
Colour stainless steel - natural; aluminium - natural; elastic inlay - black
Material Load bearing elements – aluminium 
Nitriflex elastic inlay - permanently elastic material, resistant among others to oils, bituminous masses, oxidation, acids, UV light, atmospheric conditions and temperature (to +65 °C) as well as aging and road salt. 
Covers - stainless steel.
Load [kN]
Standard length [m] Load bearing elements - 4, covers - 2 and 4, inlay - 50

 

Installation diagrams

DEFLEX 500/Nc-070

DEFLEX E 500/Nc-070