Deflex 353

Technical description

Flush-mounted profile made of high-impact synthetic material (HPVC), fibreglass mesh and sealing Nitriflex elastomer inlay, foreseen mainly for installation on building façades in jointless thermal insulation systems.
May be used for finishing of expansion joints both on wall as well as on ceiling surfaces, both indoors and outdoors.
Thanks to the broad, integrated fibreglass mesh bands, the profile ensures good and permanent bonding with the plaster.
Profile may also be used on surfaces of internal walls and ceilings with thin-layer cladding.
Profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 353-030
353-030 L
Corner profiles E 353-030
E 353-030 L
Fb [mm]
Nominal expansion slit widthj
32
32

B [mm]
Total expansion profile width 285
80

S [mm]
Visible profile width after installation 32
32

H [mm]
Installed height 50
50

BE [mm]
Total expansion profile width 150
60

SE [mm]
Visible profile width after 28
28

HE [mm]
Installed height 180
85
W ± [mm]
Expansion slit movement compensation 10 (±5)
10 (±5)
Colour white 1)
Material Load bearing profiles  - H-PVC
Installation net of glass fibre.
Nitriflex elastic inlay - permanently elastic material, resistant among others to oils, bituminous masses, oxidation, acids, UV light, atmospheric conditions and temperature (from -30 °C to +60 °C) as well as aging and road salt. Material conforms to requirements of standard DIN 185411.
Standard length [m] 2,5
1) Upon request, the profile may be manufactured in any RAL colour - at extra cost.

 

Installation diagrams

DEFLEX 353

DEFLEX E 353