Deflex 326


Technical description

Profile foreseen for permanent installation in plaster using perforated aluminium installation profile forms. May be used both on wall as well as ceiling surfaces, both indoors and outdoors. Shaped aluminium profiles facilitate easy and precise finishing of the surfaces neighbouring the profile.
Thanks to the use of an accordion elastomer inlay, the profile is characterised by very good ability to compensate for movement of the building both horizontally as well as vertically (slip joint of the inlay with the profile), and is particularly recommended for areas with mining damage.
The profile structure allows replacement of the elastomer inlay without the need to remove the aluminium profiles.
Profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 326-030
326-050
326-080
326-120
326-200
326-280
326-350
Corner profiles E 326-030
E 326-050
E 326-080
E 326-120
E 326-200
E 326-280
E 326-350
Fb [mm]
Nominal expansion slit width 30
50
80
120
200 280
350

B [mm]
Total expansion profile width 100
130
160
180
280
360
430

S [mm]
Visible profile width after installation 34
60
95
115
210
295
365

H [mm]
Installed height 17
17
17
17
17
17
17

BE [mm]
Total expansion profile width 70
55
130
150
250
330
400

SE [mm]
Visible profile width after  25
30
90
110
205
290
360

HE [mm]
Installed height 17
17
17
17
17
17
17
W ± [mm]
Expansion slit movement compensation 
10 (+8/-2)
30 (+20/-10) 45 (+30/-15)
65 (+45/-20)
90 (+50/-40)
125 (+80/-45)
150 (+100/-50)
Colour aluminium – natural, elastic inlay - black, grey, creamy white 1)
Material Aluminium load bearing profiles conforming to standard PN-EN 755
Besaflex elastic inlay - outdoor material, resistant to aging, oxidation, atmospheric influences and temperature fluctuations (from -30 °C to +60 °C), as well as influences by i. e. acids and bases. Material conforms to requirements of standard DIN 18541.
Standard length [m] Load bearing profiles - 3, elastic inlay - 20 2)
1) Upon request, the profile may be manufactured in any RAL colour - at extra cost.
2) Inlays may be manufactured in sections exceeding 20 m in length upon request.

 

Installation diagrams

DEFLEX 326

DEFLEX E 326

Wkładki elastyczne w poszczególnych profilach