Deflex 323

Technical description

Overlay profile, made of aluminium and an elastomer inlay, foreseen for installation indoors in suspended ceilings made of any kind of material.
Thanks to the use of the elastomer inlay, the profile is characterised by very good compensation of expansion joint movements in all directions.
The profile structure allows replacement of the elastomer inlay without the need to remove the aluminium profiles.
Profile is delivered without components allowing suspending the profile from the ceiling.
Profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 323-030
323-050
323-080
323-100
Corner profiles E 323-030
E 323-050
E 323-080
E 323-100
Fb [mm]
Nominal expansion slit width 30
50
80
100

B [mm]
Total expansion profile width 60
80
110
130

S [mm]
Visible profile width after installation 60
80
110
130

H [mm]
Installed height 50
50
50
50

BE [mm]
Total expansion profile width 45
65
95
115

SE [mm]
Visible profile width after 45
65
95
115

HE [mm]
Installed height 50
50
50
50
W ± [mm]
Expansion slit movement compensation 
10 (+8/-2)
30 (+20/-10)
45 (+30/-15)
65 (+45/-20)
Colour aluminium – naturalny, wkładka elastyczna – czarny , szary1)
Material Aluminium load bearing profiles conforming to standard PN-EN 755
Besaflex elastic inlay - outdoor material, resistant to aging, oxidation, atmospheric influences and temperature fluctuations (from -30 °C to +60 °C), as well as influences by i. e. acids and bases. The elastic inlay is manufactured according to plant standards.
Standard length [m] Load bearing profiles - 4, elastic inlay - 20 2)
1) Upon request, the profile may be manufactured in any RAL colour - at extra cost.
2) Inlays may be manufactured in sections exceeding 20 m in length upon request

 

Installation diagrams

DEFLEX 323

DEFLEX E 323