Deflex 322


Technical description

Overlay profile, made of aluminium and a flexible elastomer inlay, foreseen for installation on finished surfaces both indoors and outdoors. May be used as finishing for expansion slits both on walls as well as on ceilings with any kind of finishing. Thanks to the use of an accordion elastomer inlay, the profile is characterised by very good ability to compensate for movement of the building both horizontally as well as vertically (slip joint of the inlay with the profile), and is particularly recommended for areas with mining damage.
The profile structure allows replacement of the elastomer inlay without the need to remove the aluminium profiles. Broad aluminium shaped profiles simplify installation irrespective of the subsurface type. In addition, the use of a cellulose rubber layer from the underside of the installation profiles allows evening out of subsurface unevenness during installation. Profile is particularly recommended for finishing work on expansion slits in building façades, thanks to the option of installation of the entire profile inside the expansion slit (type DE).
Profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1.
Profile available in flat and corner form, and additionally in an internal variant (DE).

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 322-030
322-050
322-080
322-120
322-200
322-280
322-350
Corner profiles E 322-030
E 322-050
E 322-080
E 322-120
E 322-200
E 322-280
E 322-350
Fb [mm]
Nominal expansion slit width 30
50
80
120
200
280 350

B [mm]
Total expansion profile width 120
140
170
210
290
370
440

S [mm]
Visible profile width after installation 120
140
170
210
290
370
440

H [mm]
Installed height 15
15
15
15
15
15
15

BE [mm]
Total expansion profile width 75
95
125
165
245
325
395

SE [mm]
Visible profile width after  75
95
125
165
245
325
395

HE [mm]
Installed height 15
15
15
15
15
15
15
W ± [mm]
Expansion slit movement compensation 10 (+8/-2) 30 (+20/-10) 45 (+30/-15)
65 (+45/-20)
90 (+50/-40) 125 (+80/-45)
150 (+100/-50)
Colour aluminium – natural, replaceable inlay - grey 1)
Material Aluminium load bearing profiles conforming to standard PN-EN 755
Nitriflex elastic inlay - permanently elastic material, resistant among others to oils, bituminous masses, oxidation, acids, UV light, atmospheric conditions and temperature (from -30 °C to +60 °C) as well as aging and road salt. Materiał odpowiada wymogom normy DIN 18541.
Standard length [m] Load bearing profiles - 4, elastic inlay - 20 2)
1) Upon request, the profile may be manufactured in any RAL colour - at extra cost..
2) Inlays may be manufactured in sections exceeding 20 m in length upon request

 

Installation diagrams

DEFLEX 322

DEFLEX E 322