Floor profile made of aluminium and Nitriflex® synthetic material, foreseen for installation on unfinished floor surfaces. It is characterised by its ability to compensate for building movements both horizontally as well as vertically (slip joint of the inlay with the profile.
Specially-shaped load bearing profiles are masked by an elastomer inlay.
Profile side surface protection is achieved through the use of a stainless steel cover - 489/ce type profile - or a brass cover - 489/cm type profile.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
An advantage of the profile is its adjustability to a desired height using screws in the side profiles.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile is available as flat, a type E corner version and a type EV corner version.
Adhere to assembly recommendations and instructions.
|Flat bar profiles||489/ce-060
|Corner profiles||E 489/ce-060
||Nominal expansion slit width||60||60|
||Total expansion profile width||170
||Visible profile width after installation||75
||Total expansion profile width||113
||Visible profile width after installation||66
|W ± [mm]
||Expansion slit movement compensation||20(±10)
|Colour||Aluminium - natural, elastic inlay - black and grey 1)|
|Material||Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt.
|Side covers - synthetic steel||Side covers - brass|
|Standard length [m]||4
|DEFLEX E 489/cm-060|