Floor profile made of aluminium, HPVC and Nitriflex® synthetic material, foreseen for installation on unfinished floor surfaces.
It is characterised by a replaceable skid-protection inlay and aesthetic design.
The profile is distinguished by its interior aluminium reinforcement.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
Particularly recommended for use in structures such as office buildings, banks, hotels, etc.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile is available as flat, a type E corner version and a type EV corner version.
Adhere to assembly remarks and indications.
|Flat bar profiles||446/cxl-140
|Corner profiles||E 446/cxl-140
||Nominal expansion slit width||140
||Total expansion profile width||260/285*
||Visible profile width after installation||170
||Total expansion profile width||218/243*
||Visible profile width after installation||158
|W ± [mm]
||Expansion slit movement compensation||30 (+20/-10)
|Colour||Aluminium - natural, elastic inlay - black and grey 1)|
|Material||Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt.
|Standard length [m]||4
|DEFLEX E 446/cxl-140|