Floor profile made of aluminium and Nitriflex® synthetic material, foreseen for installation on unfinished floor surfaces.Thanks to the use of a synthetic material inlay, the profile is characterised by excellent movement compensation abilities of the expansion slit in all directions.The profile structure allows replacement of the synthetic material inlay without any need to remove the profile components.Profile side surface protection is achieved through the use of a stainless steel cover - 446/cPe type profile - or a brass cover - 446/cPm type profile.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
The profile has the advantage of being resistant to aggressive media.
It is particularly recommended for use in laboratories, breweries, meat processing facilities, etc.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile is available as flat, a type E corner version and a type EV corner version.
Adhere to assembly remarks and indications.
|Flat bar profiles||446/cPe-050
|Corner profiles||E 446/cPe-050
||Nominal expansion slit width||50
||Total expansion profile width||150/170*
||Visible profile width after installation||62
||Total expansion profile width||103/123*
||Visible profile width after installation||59
|W ± [mm]
||Expansion slit movement compensation||20(±10)
|Colour||Aluminium - natural, elastic inlay - black and grey 1)|
|Material||Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt.
|side covers - stainless steel||side covers - brass|
|Standard length [m]||4
|DEFLEX E 446/cPm-050|