Deflex 446/cp


Technical description

Floor profile made of aluminium and Nitriflex® pynthetic material, foreseen for installation on unfinished floor surfaces. It is characterised by its ability to compensate for movement of its expansion joint both horizontally as well as vertically (slip joint of the inlay with the profile).
The profile structure allows replacement of the synthetic material inlay without any need to remove the profile components. The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile is available as flat, a type E corner version and a type EV corner version.

Adhere to assembly remarks and indications.

Technical details
Flat bar profiles 446/cP-050
Corner profiles E 446/cP-050
Fb [mm]
Nominal expansion slit width 50

B [mm]
Total expansion profile width 150/170*

S [mm]
Visible profile width after installation 60

H [mm]
Installed height 30/40*/50/55*/60/80/100

BE [mm]
Total expansion profile width 103/123*

SE [mm]
Visible profile width after installation 58

HE [mm]
Installed height 100/110*/120/125*/130/150/170
W ± [mm]
Expansion slit movement compensation 20(±10)
Colour Aluminium - natural, elastic inlay - black and grey 1)
Material Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt. 
Load [kN]**
Standard length [m] 4

 

Installation diagrams

DEFLEX 446/cP-050

DEFLEX E 446/cP-050

DEFLEX 446/cP-050