Deflex 445/l

Technical description

Floor profile made of aluminium and Nitriflex synthetic material, foreseen for installation on unfinished floor surfaces.
It is characterised by use in prestigious projects with high-quality floor finishes. The broad range of offered profile finishes allows the use in particular in such sites as palaces, company head offices, hotels, shopping centres, etc.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
Aluminium profile surface and inlay protection is achieved through the use of a stainless steel cover or a brass cover.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile available as flat and as a corner variant.

Adhere to recommendations and remarks concerning installation.

Technical details
Flat bar profiles 445/L-050
Corner profiles E 445/L-050
Fb [mm]
Nominal expansion slit width 50

B [mm]
Total expansion profile width 180

S [mm]
Visible profile width after installation 62

H [mm]
Installed height 25/30/40/55

BE [mm]
Total expansion profile width 118

SE [mm]
Visible profile width after installation 57

HE [mm]
Installed height 75/80/90/105
W ± [mm]
Expansion slit movement compensation 20(±10)
Colour Aluminium - natural, elastic inlay - black and grey 1)
Material Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt.
Side covers - stainless steel, brass.
Load  [kN]**
Standard length [m] 4


Installation diagrams

DEFLEX 445/L-050

DEFLEX E 445/L-050

DEFLEX 445/L-050