Deflex 445


Product description

Floor profile made of aluminium and Nitriflex®synthetic material, foreseen for installation on unfinished floor surfaces. Thanks to the use of a synthetic material inlay, the profile is characterised by excellent movement compensation abilities of the expansion slit in all directions.
The replaceable synthetic material inlay is also available smooth, with reduced accommodation ability (50% of the value for the standard inlay). The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc.
The profile structure allows replacement of the synthetic material inlay without any need to remove the profile components.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time. 
Profile is available as flat, a type E corner version and a type EV corner version.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 445-050
Corner profiles E 445-050
Fb [mm]
Nominal expansion slit width 50

B [mm]
Total expansion profile width 180

S [mm]
Visible profile width after installation 60

H [mm]
Installed height 20/25/35/50

BE [mm]
Total expansion profile width 118

SE [mm]
Visible profile width after installation
56

HE [mm]
Installed height 75/80/90/105
W ± [mm]
Expansion slit movement compensation 20(±10)
Colour Aluminium - natural, elastic inlay - black and grey 1)
Material Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt. 
Load [kN]**
Standard length [m] 4

 

Installation diagrams

DEFLEX 445-050

DEFLEX E 445-050

DEFLEX 445-050