Deflex 810/rs

Technical description

Floor profile manufactured entirely of aluminium, foreseen for installation on unfinished floor surfaces.
It is characterised by its anti-skid surface, appealing aesthetics and high compensation for vertical movements (cave-ins). The anti-skid surface is provided in inlays made of synthetic material (Nitriflex).
Foreseen for primary use in seismically-active regions and in regions under threat of mining damage (cave-ins). An optional available integrated inlay of synthetic material (Nitriflex) evening out the profile level is available.
The profile finds use for various kinds of floor finishes, i. e. screed, natural stone, stone imitation, etc. Particularly recommended for use in public buildings, i. e. schools, pre-schools, railway stations, shopping centres, meaning - everywhere, where foot traffic is increased and where safety is required.
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 810/RS-135
810/RS-210
810/RS-250
810/RS-340
Corner profiles E 810/RS-135
E 810/RS-210
E 810/RS-250
E 810/RS-340
Fb [mm]
Nominal expansion slit width 135
210
250
340

B [mm]
Total expansion profile width 255/275*
340/360*
370/390*
465/485*

S [mm]
Visible profile width after installation 165
250
280
375

H [mm]
Installed height 43/48*/58/63*/68/108

BE [mm]
Total expansion profile width 185
260
300
390

SE [mm]
Visible profile width after installation 140
255
255
350

HE [mm]
Installed height 85/90*/100/105/110/150
W ± [mm]
Expansion slit movement compensation 40(±20)
100(±50)
120(±60)
150(±75)
Colour Aluminium - natural
Material Aluminium - properties according to standard PN-EN 755.
Load [kN]**
Standard length [m] 4
* profile dimensions available upon request
** see load table in the 'Guidelines concerning expansion joint selection and design' tab

Installation diagrams

DEFLEX 810/RS-250

DEFLEX E 810/RS-210

DEFLEX 810/RS-135