Deflex 800



Technical description

Floor profile made of aluminium and Nitriflex synthetic material, foreseen for installation on unfinished floor surfaces.
The profile has an elastic inlay with a smooth surface and a rippled outside surface of aluminium shape profiles.
It is characterised by appealing aesthetics and high compensation for vertical movements (cave-ins). Foreseen for primary use in seismically-active regions and in regions under threat of mining damage (cave-ins).
The profile conforms to fire resistance requirements for class E according to standard PN-EN 13501-1, according to which the products are able to stand up to the effects of a small flame without significant flame spreading - for a short time.
Profile available in flat and corner form.

Adhere to notices and remarks concerning installation.

Technical details
Flat bar profiles 800-120
800-150
800-180
800-200
800-250
800-320
Corner profiles E 800-120
E 800-150
E 800-180
E 800-200
E 800-250
E 800-320
Fb [mm]
Nominal expansion slit width 120
150
180
200
250
320

B [mm]
Total expansion profile width 245/265*
265/285*
210/330*
330/350* 375/395*
440/460*

S [mm]
Visible profile width after installation 155
175
220
240
285 350

H [mm]
Installed height 43/48*/58/63*/68/88/108

BE [mm]
Total expansion profile width 180
200
145
265
310
375

SE [mm]
Visible profile width after installation 135
155
200
220
265
330

HE [mm]
Installed height 85/90*/100/105*/110/130/150
W ± [mm]
Expansion slit movement compensation 
18(±9)
20(±10)
28(±14)
30(±15)
70(+40/-30)
90(+50/-40)
Colour Aluminium - natural, elastic inlay - black and grey 1)
Material Load bearing profiles - aluminium - properties according to standard PN-EN 755.
Nitriflex® elastic inlay - a permanently flexible material, resistant i. e. to oils, bitumen masses, oxidation, UV rays, atmospheric conditions and temperature (-30 °C to +60 °C), as well as ageing and traffic salt.
Load [kN]**
Standard length [m] 4

1) If required, it is possible to manufacture the profiles in any selected RAL palette colour - surcharge required.
* profile dimensions available upon request
** see load table in the 'Guidelines concerning expansion joint selection and design' tab

Installation diagrams

DEFLEX 800-180

DEFLEX E 800-120

DEFLEX 800-200