Product Range

SECUMAX® transport container

SECUMAX® transport container
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
SECUMAX® transport container
77,5
1200
1300
800 800
pcs. BH-SX-00-0-00899

The Secumax container was designed with transport and storage of edge safety equipment n mind. It can be used also with other construction equipment. The container structure allows transport of parts weighing up to 1200 kg in total. The container base rests on two support feet, which simplifies setting it up on the ground, even if the ground area is not level. In addition, these feet allow transporting the container using a forklift. In the corners, eyes were installed, allowing transport with a hoisting device using a sling. There is one swing-away side, allowing easier loading and unloading of the container. The container bottom is made of profiled sheet steel, and the side walls are made of mesh. The container is protected by a corrosion-prevention coat.

Anti-corrosion protection: immersion coating-applied coat.  
Storage: full - six-piece stack  
             full - three-piece stack (at construction site)





 

Transport container - Type A

Transport container - Type A 
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Type A 
74
1200
1200
800 800
pcs. SB-TW-MT-0-05979

 

Container foreseen for transport and storage of construction equipment. The container structure allows transport of components with a total weight of 1200 kg. The base of the container rests on two feet, simplifying its set-up on the ground even if it is uneven. In addition, these feet allow transport of the container by forklift. In the corners, transport eyes were installed, to allow lifting of the container by an appropriate device using slings. One side is a swing-away side, which simplifies loading and unloading of the container. The bottom of the container is made of profiled sheet steel, and the side walls are made of a mesh. The entire structure is protected by a zinc coat.

Anti-corrosion protection: immersion coating-applied coat.  
Storage: full - six-piece stack  
             full - three-piece stack (at construction site)


 

Transport container - type B (full-wall)

Transport container - Type B 
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Type B 
87,5
1200
1200
800 800
pcs. SB-TW-MT-0-05981

The container is used for transport and storage of construction equipment. The container structure allows the transport of components having a total weight of 1200 kg. The container base rests on two stands, simplifying its arrangement on even uneven surfaces. In addition, these stands allow the transport of the container using a forklift. The corners are equipped with eyes allowing transport using hoisting equipment and slings. One side swings away allowing simpler container loading and unloading.  The type B differs from type A in that it uses profiled sheet steel for its entire structure, both the side walls and the bottom. The entire container is protected by a zinc coat.

 


Storage: full - six-piece stack  
             full - three-piece stack (at construction site)

 

 

 

Transport container - type C (lockable)

Transport container - Type C
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Type C 
85,0
1200
1200
800 800
pcs. SB-TW-MT-0-05982

Container foreseen for transport and storage of construction equipment. The container structure allows transport of components with a total weight of 1200 kg. The base of the container rests on two feet, simplifying its set-up on the ground even if it is uneven. In addition, these feet allow transport of the container by forklift. In the corners, transport eyes were installed, to allow lifting of the container by an appropriate device using slings. One side is a swing-away side, which simplifies loading and unloading of the container. The container bottom is made of profiled sheet steel, and the side walls are made of a mesh. The container is additionally equipped with a sheet steel cover, allowing the use of a padlock to protect the container contents from theft. The entire structure is protected by a zinc coat.

Storage: full - six-piece stack  
             full - three-piece stack (at construction site)

 

 

SECUMAX® transport container for battens and meshes


SECUMAX®  transport container for battens and meshes
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
SECUMAX® transport container for battens and meshes
190
1200
2690
840
1505
pcs. SB-TW-MT-0-05983

The Secumax transport container for battens and meshes allows transport and storage of battens (148 pcs.) or protective mesh (29 pcs.). It is a light (190 kg) structure, with a removable front panel, allowing quick loading and unloading of parts. The entire structure may be transported using a forklift, or using a crane with the application of a four-wire sling. Structure protected by a zinc coat, and adapted for storage together with the Secumax transport container. 

Storage: full - two-piece stack  

 

Transport container - Type E

Transport container - Type E
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Type E 
87,5
600
1250
1050
1200 pcs. SB-TW-MT-0-05810

 

The container is foreseen for storage of construction equipment, providing in this case easy transport at the construction site using a crane, or alternatively a forklift. To facilitate loading and unloading, the container was equipped with a swing-away and removable side. The bottom is made of profiled sheet steel, with the side walls made of mesh. The entire container is protected by a zinc coat.

 

Anti-corrosion protection: immersion coating-applied coat.  
Storage: full - four-piece stack  
Transport: full - two-piece stack (at construction site)


 

 

 

 

Transport container Type F (mesh structure, collapsible)


Transport container - Type F
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Type F 
105
605
1200
1100
1150
pcs. SB-TW-MT-0-05811

The container is foreseen for storage of construction equipment, providing in this case easy transport at the construction site using a crane, or alternatively a forklift. To facilitate loading and unloading, the container was equipped with a swing-away side. The bottom is made of profiled sheet steel, with the side walls made of mesh. The entire container is protected by a zinc coat. Thanks to the use of a collapsible container structure, the space necessary for storage of empty containers is reduced.

Anti-corrosion protection: immersion coating-applied coat.  
Storage: full - four-piece stack  
Transport: full - two-piece stack (at construction site)

 

Universal full-wall container

Universal full-wall container
Symbol

Own weight
 [kg]

Total weight with maximum load*
[kg]

Dimensions [mm] Sales
unit

Art. no.

a
b
h
Universal full-wall container 76,0
1100
1200
800
630 pcs. SB-TW-MT-0-05984

The universal container is foreseen for storage of construction site equipment and other components, providing in this regard easy transport ability at the construction site using a crane or a forklift. The entire structure is made of profiled sheet steel, thanks to which small parts or even bulk materials may also be stored.

Storage: full - six-piece stack  
Transport: full - three-piece stack (at construction site)


 

Support component pallet

Support component pallet
Symbol

Own weight
 [kg]

Total weight with maximum load
[kg]

Dimensions [mm] Sales
unit

Art. no.
a
b
c
d
h
Support component pallet 120
35
1500
1150
750
650
500
765
pcs. SB-TW-MT-0-07001

Equipment foreseen for transport and storage of support components, stays, girders. The use of support component pallets brings many advantages. The structure eases and simplifies transport, both to the construction site as well as internally around the site.


Storage: full - four-piece stack