Bindax Bendable Reinforcement System, Non-Standard

We also supply the BINDAX reinforcement system in the following non-standard versions

 

  • component length - 1,25 m; other lengths upon request
  • rail width: 60, 80, 110, 140, 160, 190, 220, 240 mm
  • loop types according to drawings
  • reinforcement bar diameter: 8, 10, 12, 14, 16 mm
  • rail bar spacing: 10, 15, 20, 25, 30 cm
  • other spacing distances available upon request
  • loop width must be lowed than the width of the reinforced component by at least 2 cm
  • 5 cm high box available








 

Designation examples:

 

 

Non-standard bar types

Type W: Single bar, perpendicular to the rail

Type WH: Single bar bent by 90°. Bends placed along rail

Type WS: Single bar bent by 90°.
Type H: As in the standard version. Bends placed crosswise with respect to the rail. Width - 60 or 80 mm. Single-row variant.
Type BK: Symmetric 'console'-type loop. Closed loop. Available versions for the following loop spacings: 90, 120, 140, 170, 200, 220 mm.
Type BA: Arch allowing deep anchoring.
Type S: Symmetric loop. Straight sections concreted during second stage.
Type KO: Symmetric 'console'-type loop. Open loop. Straight sections concreted during first stage.
Type K: Closed loop. Available for the following loop spacings: 90, 120, 140, 170, 200, 220 mm.
Type KH: Semi-open loop.
Type B: Symmetric loop installed in two parallel rails.
Type BA+H: Arch with single or dual rail.